Product Description:

The MHD095B-035-NG0-AN is a servo motor from Bosch Rexroth Indramat in the MHD Synchronous Motors series. The unit combines motor size 095 with length code B, giving a compact footprint for multi-axis packaging lines, gantries, and machining centers. Intended for closed-loop automation, it converts electrical energy into controlled rotation for precise positioning tasks across industrial machinery. Its compact format also suits installations where axis spacing is limited and cable routing must remain orderly.

At standstill the motor delivers 17.5 Nm of continuous torque, providing stable holding force with minimal current draw. Heat is extracted by a liquid cooling jacket built into the housing, enabling full output throughout the 0 to 40 °C operating ambient range without derating. The enclosure carries an IP65 protection rating, which helps keep dust and water jets away from internal components. Power reaches the windings through an output connector mounted on side A, and the 035 winding code matches the stator impedance to compatible Indramat drives for efficient current regulation. Because the motor is supplied without a holding brake, external mechanical locks or drive torque must secure the load when power is removed.

The housing presents a 130 mm centering diameter and a 140 / 150 mm flange size, allowing direct installation on standard ISO flanges. Position feedback uses a digital servo feedback HSF encoder with an optical measurement method, achieving ± 0.5 angular minutes system accuracy; the position value is relative and referenced at power-up. This feedback arrangement supports stable speed regulation and repeatable positioning during axis moves. F insulation protects the windings up to 155 °C, while a shaft seal helps prevent fluid ingress around the plain output shaft. Storage temperatures from −20 to +80 °C and a maximum setup height of 1000 m support use in a wide range of machine rooms.