Product Description:

The MHD095B-024-NP0-BN is a servo motor manufactured by Bosch Rexroth Indramat and belongs to the MHD Synchronous Motors series. Designed for closed-loop motion tasks in industrial automation, it provides precise rotary power to drives that govern conveyors, tool spindles, and pick-and-place systems. The motor works with Rexroth digital drives, allowing the application to match electrical performance with mechanical load requirements while maintaining compact installation dimensions.

The motor produces a continuous stall torque of 17.5 Nm, giving the axis steady holding capability for static or slowly moving loads without overheating. A housing rated to IP65 blocks dust ingress and resists low-pressure water jets, so the unit can be mounted on frames exposed to washdown aerosols or airborne particulate. Heat generated in the stator is removed by liquid cooling, enabling higher duty cycles than comparable air-cooled designs and reducing surrounding heat buildup. Proper operation is specified within 0 to 40 °C, which matches typical plant conditions and avoids derating at standard room temperatures. The flange incorporates a 130 mm centering diameter that aligns the stator with gearbox or machine faces and maintains concentricity during high dynamic reversals.

Closed-loop control is supported by digital servo feedback (HSF), which streams high-resolution position data to the drive. This allows the controller to use the motor’s accuracy of ±0.5 angular minutes without additional external sensors. Torque transfer to couplings is handled by a keyed shaft, which helps prevent rotational slip under peak load transients and simplifies hub alignment. Thermal endurance is enhanced by windings built to Insulation Class F, so dielectric integrity is maintained during elevated coolant temperatures and normal industrial duty.