MHD095B-024-NG0-BN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911305464
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
49 Seconds
The Bosch Rexroth Indramat MHD095B-024-NG0-BN is a servo motor from the MHD Synchronous Motors series. It provides a continuous torque at standstill of 17.5 Nm and uses digital servo feedback for encoder type. The motor features liquid cooling, a plain shaft with seal, and is rated with IP65 protection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD095B-024-NG0-BN is a servo motor manufactured by Bosch Rexroth Indramat as part of the MHD Synchronous Motors series. Installed on machinery that demands precise rotary motion, it links to a drive controller and converts commanded current into controlled mechanical output for positioning, indexing, or velocity regulation along automated production axes. This type of motor is commonly used where repeatable shaft motion and stable closed-loop response are required during continuous machine operation.
The motor develops a continuous standstill torque of 17.5 Nm, giving drives enough static force to hold loads without additional gear reduction. A housing rated at IP65 blocks dust and low-pressure water jets, so the unit can be mounted directly on equipment frames. Heat is removed through an internal liquid cooling jacket that keeps winding temperatures within the F-class insulation limit while suppressing external noise. Reliable feedback is supplied by a digital servo encoder that uses an optical measurement method and provides relative position data to the controller. Within the permitted ambient range of 0 to 40 °C, positioning accuracy reaches ± 0.5 angular minutes, allowing repeatable alignment of tool heads or transport pallets. Power conductors exit on side B through an output connector, and no holding brake is fitted, which simplifies inertial response for axes that rely on drive torque for static restraint.
The centering pilot measures 130 mm and aligns with a flange drilled on a 140 / 150 mm square bolt pattern. The plain shaft is protected by a shaft seal, which helps prevent coolant or lubricant ingress during washdown cycles. The 095 model code indicates the stator diameter, while the B-length variant and winding code 024 balance speed and current ratings for medium-inertia loads. The unit can be stored between -20 to +80 °C, and installation is approved up to 1000 m above mean sea level without derating. This mounting arrangement supports accurate alignment between the motor and the driven machine element.
Frequently Asked Questions about MHD095B-024-NG0-BN:
Q: What type of cooling does the MHD095B-024-NG0-BN motor use?
A: The MHD095B-024-NG0-BN uses liquid cooling to manage motor temperature during operation.
Q: Does the MHD095B-024-NG0-BN include a holding brake?
A: This model is manufactured without a holding brake for the shaft.
Q: What is the ingress protection rating of the MHD095B-024-NG0-BN motor?
A: The degree of protection is rated at IP65, providing full dust tightness and protection from water jets.
Q: What type of encoder feedback does the MHD095B-024-NG0-BN motor use?
A: The encoder uses digital servo feedback (HSF) for relative position detection via optical measurement.
Q: What is the continuous torque at standstill for the MHD095B-024-NG0-BN motor?
A: The continuous standstill torque for this model is rated at 17.5 Nm.
