Product Description:

The MHD095B-024-NG0-AN is manufactured by Bosch Rexroth Indramat and belongs to the MHD Synchronous Motors series. It is a servo motor intended for precision axis drives in industrial automation, where closed-loop positioning and speed control are required to move machine tools, material-handling gantries, and packaging stations with repeatable accuracy. Power reaches the windings from side A through an output connector, which helps keep cable routing consistent at the motor connection point.

The motor delivers a continuous standstill torque of 17.5 Nm, allowing stable low-speed operation without excess heat. The motor is rated IP65, so dust and water jets do not disturb internal components during washdown cycles. Heat is removed by liquid cooling, which keeps winding temperature stable during extended duty. Within an ambient range of 0 to 40 °C, the unit maintains full performance without derating. Position feedback comes from a digital servo feedback (HSF) encoder that transmits high-resolution signals for rapid control loops, and the optical measuring method avoids mechanical wear. Winding code 024, the B-length housing, and size 095 indicate the motor's electrical and dimensional characteristics.

Positioning accuracy is ± 0.5 angular minutes, supporting tight contouring in synchronized multi-axis assemblies. Mounting interfaces include a centering diameter of 130 mm and a flange pattern of 140 / 150 mm, enabling repeatable alignment on standard machine frames. Thermal endurance is supported by Insulation Class F, allowing winding temperatures up to 155 °C during short overloads. The motor is supplied without a holding brake, so external clamps or drive torque must secure the load at rest, and a shaft seal is present to block lubricant migration along the plain shaft. Storage is permitted between -20 and +80 °C, and installation heights up to 1000 m above mean sea level are supported. Relative position detection maintains calibration during power cycling, while the plain-shaft design simplifies coupling to gearboxes or timing pulleys.