Product Description:

The MHD095B-024 is a servo motor produced by Bosch Rexroth Indramat for the MHD Synchronous Motors series. This rotary actuator is intended for closed-loop positioning and speed control in industrial automation, where it forms the mechanical output stage of a drive system. By converting electrical commands from a controller into precise shaft motion, the unit supports coordinated axes on machining centers, handling modules, and packaging equipment.

The motor delivers a Continuous Torque at Standstill of 17.5 Nm, enabling it to hold static loads without exceeding its thermal limit. That capability is often referred to as standstill torque, and it defines how much force can be maintained when the shaft is locked by the control loop. A square housing with a flange dimension of 140 / 150 mm matches common IEC mounting patterns, while size code 095 indicates the stator diameter that determines overall power density. The electrical configuration is defined by Winding Code 024, which sets the resistance and inductance parameters expected by the matching power drive.

Accurate mechanical alignment is achieved through a centering diameter of 130 mm, ensuring the shaft axis coincides with the machine reference bore. Frame depth is determined by length code B, and this value, together with its associated length code, increases the lamination stack without altering the footprint, providing extra thermal mass for extended duty cycles. These dimensional features simplify installation, keep concentricity within tolerance, and allow the motor to transmit torque directly into couplings or belt pulleys while maintaining bearing life.