MHD095A-035-PG0-LN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911323754
The Bosch Rexroth Indramat MHD095A-035-PG0-LN is a servo motor from the MHD Synchronous Motors series with a plain shaft and liquid cooling. It features a continuous torque at standstill of 12 Newton-meters, IP65 protection, and digital servo feedback with an integrated encoder. This motor has a flange size of 140 to 150 millimeters and an insulation class of F.
Internal Product Review
The MHD095A-035-PG0-LN is a Bosch Rexroth Indramat servo motor with liquid cooling and IP65 protection. Digital servo feedback with integrated encoder and absolute position detection beyond 4096 revolutions support highly dependable motion feedback. Continuous standstill torque of 12.0 Nm makes the motor a strong choice for precise, demanding servo applications.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD095A-035-PG0-LN belongs to the MHD Synchronous Motors series produced by Bosch Rexroth Indramat. It is a three-phase servo motor intended for closed-loop positioning and velocity tasks in industrial automation where repeatable movement and high feedback resolution are required. As a servo device, it integrates a digital encoder to report rotor position to the drive controller, enabling precise electronic commutation, torque regulation, and coordinated multi-axis motion. This arrangement lets the drive monitor speed and position continuously during acceleration, holding, and reversal.
This motor uses size 095 stator hardware with length code A and winding code 035. Mechanical interface dimensions include a centering diameter of 130 mm and a flange pattern of 140/150 mm, which simplifies interchange with other Rexroth frames. Continuous stall torque is rated at 12.0 Nm, allowing moderate feed forces, and a housing with liquid cooling channels removes heat directly from the stator jacket. The enclosure carries a protection rating of IP65, so internal components remain isolated from dust and water jets encountered on the plant floor. Operation is permitted at ambient temperatures from 0 to 40 °C. The motor uses a plain shaft with a shaft seal to support external couplings while helping keep contamination away from internal components. Electrical power enters through a left-hand power connector, and the motor does not include an internal brake, so load holding must be provided by the drive or external mechanics.
The integrated optical measurement system achieves a system accuracy of ± 0.5 angular minutes and provides absolute (>4096 revolutions) position data, removing the need for homing after power restoration. Insulation materials meet class F thermal limits, and storage conditions are allowed between -20 to +80 °C without performance loss. Installation is approved up to 1000 m above mean sea level. Common applications include gantries, packaging axes, and transfer stations that require repeatable motion.
