Product Description:

The MHD093C-058-PP2-AA is a servo motor manufactured by Bosch Rexroth Indramat and included in the MHD Synchronous Motors series. Designed for closed-loop drive systems, it converts controlled stator current into precise rotary motion for machine tools, packaging equipment, and other automated axes that require repeatable positioning. An integrated encoder supplies real-time position data to the drive controller, allowing the axis to correct for load changes during acceleration, deceleration, and steady-speed operation. The keyed shaft allows direct coupling to load mechanisms, and this arrangement supports accurate speed and torque regulation during repetitive industrial cycles.

At standstill, the motor can deliver a continuous torque of 23.0 Nm, and when the holding brake is engaged, it resists back-drive forces with 32.0 Nm of static torque. Position repeatability is supported by a system accuracy of ± 0.5 angular minutes, which is achieved through optical digital servo feedback. Mechanical mounting uses a centering diameter of 130 mm with a dual-pattern 140 / 150 mm flange, helping the motor align securely to common machine interfaces. All conductors exit toward side A through an output connector, and the housing has an IP65 protection rating that resists dust and low-pressure water.

The motor relies on natural convection for heat dissipation, enabling continuous duty at ambient temperatures of 0 to 40 °C. Class F insulation withstands the thermal rise produced under dynamic loads, and multi-turn position data are preserved by absolute multi-turn detection over 4096 revolutions. Installations may be located up to 1000 m above mean sea level without performance loss, and storage is permitted from −20 to +80 °C after power is removed. A shaft seal prevents fluid entry at the output journal, while the compact 093 frame with C length helps the motor fit space-limited machine layouts.