MHD093C-058-PP1-RN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911315210
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
10 Seconds
The Bosch Rexroth Indramat MHD093C-058-PP1-RN is a servo motor from the MHD Synchronous Motors series featuring liquid cooling and a keyed shaft with a shaft seal. It includes a holding brake with 22.0 Nm torque and uses digital servo feedback with an integrated encoder for absolute position detection over more than 4096 revolutions. The motor offers a continuous torque at standstill of 23.0 Nm and has a centering diameter of 130 mm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD093C-058-PP1-RN is a servo motor built by Bosch Rexroth Indramat for the MHD Synchronous Motors series. It is used to provide closed-loop torque and speed in industrial automation axes where precise feedback is required for coordinated motion. The motor integrates digital servo feedback to report rotor position directly to the drive, allowing deterministic control in packaging lines, machining centers, and material-handling gantries. Its synchronous design supports accurate response during acceleration, indexing, and steady-speed operation in machines that depend on repeatable axis behavior.
Continuous stall capability is rated at 23.0 Nm, which is the steady torque the stator can sustain without overheating while the rotor remains stationary. The centering shoulder measures 130 mm, helping align the motor on a machine frame so radial runout stays low during repeated cycles. Heat is removed through liquid cooling, which supports higher power density than air-cooled designs. Torque is transmitted through a keyed shaft, and the flange drilling pattern spans 140/150 mm for compatibility with earlier IEC-based mounting layouts. The motor has length code C, size 093, and winding code 058, placing it in a mid-frame configuration for applications that need a balance of torque capacity and installation space.
The holding device provides 22.0 Nm of brake torque, so a vertical axis can remain stationary when input power is removed. Position retention is supported by absolute position over more than 4096 revolutions, which allows the drive to recover shaft location without a homing cycle after an interruption. Power leads exit on the right side through a sealed power connector, which helps keep cable routing orderly when the drive is mounted above the motor. A shaft seal helps block coolant spray and fine dust, and the liquid jacket around the stator helps keep winding temperatures stable during demanding duty cycles. This layout is useful in enclosed machine areas where orderly cable routing and resistance to contamination are important.
Frequently Asked Questions about MHD093C-058-PP1-RN:
Q: What type of encoder is included with the MHD093C-058-PP1-RN servo motor?
A: The MHD093C-058-PP1-RN features a digital servo feedback system with an integrated encoder for precise motor control.
Q: Does the MHD093C-058-PP1-RN include a holding brake?
A: Yes, this model comes equipped with a holding brake that provides a torque of 22.0 Nm.
Q: What type of cooling does the MHD093C-058-PP1-RN motor use?
A: The MHD093C-058-PP1-RN is cooled with a liquid cooling system for improved thermal management in demanding environments.
Q: What is the type of position detection offered by the MHD093C-058-PP1-RN?
A: This motor provides absolute position detection capability for more than 4096 revolutions.
Q: What is the continuous standstill torque of the MHD093C-058-PP1-RN?
A: The MHD093C-058-PP1-RN delivers a continuous torque of 23.0 Nm at standstill.
