MHD093C-058-PP0-RA Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911308217
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
14 Seconds
The Bosch Rexroth Indramat MHD093C-058-PP0-RA is a servo motor from the MHD Synchronous Motors series with a continuous torque at standstill of 23 Nm and keyed shaft design. This model has a flange size of 140/150 mm, a centering diameter of 130 mm, and features digital servo feedback with an integrated absolute encoder for position detection above 4096 revolutions. It is cooled by natural convection and does not include a holding brake.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD093C-058-PP0-RA is a servo motor manufactured by Bosch Rexroth Indramat and assigned to the MHD Synchronous Motors series. Within industrial automation, this motor converts drive controller output into precise rotary motion for machine tools, packaging stations, and material-handling axes. Its design pairs the 093 frame size with a C-length housing so the stator winding, rotor inertia, and mounting interface fit mid-range power requirements without unnecessary bulk. This combination supports installations that need responsive motion control while still leaving room for surrounding guards, couplings, and cable routing.
The motor mounts against a flange circle of 140 / 150 mm and is centered by a 130 mm pilot to keep the shaft aligned with the driven load. The pilot also helps maintain concentric installation, which reduces coupling stress and supports smoother running during repeated acceleration and deceleration. At standstill, it can produce a continuous torque of 23.0 Nm, giving closed-loop controllers a stable reserve for holding force and low-speed process motion. Heat generated by copper loss is removed through natural convection, eliminating the need for blowers where ambient airflow is available. Electrical characteristics are tied to winding code 058, so the connected inverter must match the motor's electrical behavior for proper current control and smooth operation.
Mechanical transmission is handled by a keyed shaft, and a shaft seal helps keep dust or coolant away from the front bearing area. Rotor position is reported through digital servo feedback; the integrated encoder supports absolute feedback for more than 4096 revolutions, so homing routines are unnecessary after a power interruption. This feedback arrangement supports stable commutation and accurate speed regulation across typical servo operating ranges. Power enters through a molded connector oriented to the right, which can simplify cable routing on machines that group drives and motor leads on one side. The motor does not include a holding brake, so vertical or suspended loads need a separate method to remain secured when drive power is removed.
Frequently Asked Questions about MHD093C-058-PP0-RA:
Q: What type of cooling does the MHD093C-058-PP0-RA motor use?
A: The MHD093C-058-PP0-RA uses natural convection for housing cooling and does not require forced-air cooling systems.
Q: Does the MHD093C-058-PP0-RA motor include a holding brake?
A: This model is manufactured without a holding brake, so it does not provide braking functionality when powered off.
Q: What type of encoder does the MHD093C-058-PP0-RA motor have?
A: The encoder is a digital servo feedback type with integrated absolute position detection for more than 4096 revolutions.
Q: What is the continuous torque at standstill for the MHD093C-058-PP0-RA?
A: This motor provides a continuous torque of 23.0 Nm when at standstill for stable operation.
Q: How is the power connection configured on the MHD093C-058-PP0-RA?
A: The power connection on this model is a connector that is oriented to the right.
