MHD093C-058-PG1-BN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911275800
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
46 Seconds
The Bosch Rexroth Indramat MHD093C-058-PG1-BN is part of the MHD Synchronous Motors series and is a servo motor with a continuous torque at standstill of 23.0 Nm. This motor features IP65 protection, liquid cooling, and a holding brake torque of 22.0 Nm. It includes a digital servo feedback encoder and supports absolute position detection over more than 4096 revolutions.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD093C-058-PG1-BN belongs to the MHD Synchronous Motors series manufactured by Bosch Rexroth Indramat. It is a three-phase servo motor used for coordinated axis motion in industrial automation, where consistent torque delivery and precise feedback are required for positioning tasks on machining centers, packaging lines, and material-handling gantries. The motor is suited to applications that need repeatable starts, controlled stopping, and stable response during frequent speed changes. Its servo design allows the connected drive to regulate position and torque with high accuracy during dynamic machine cycles. This makes it suitable for axes that reverse direction often and must hold position between moves.
During continuous standstill, the motor supplies 23.0 Nm of torque, which is the maximum static load it can support without rotating. Its housing carries a protection rating of IP65, sealing the windings and encoder against dust ingress and low-pressure water jets in washdown areas. Heat is removed by an internal coolant passage that provides liquid cooling, allowing high current density without exceeding thermal limits. Position error is held within ± 0.5 angular minutes, so closed-loop controllers can maintain tight machining tolerances. A spring-applied brake delivers 22.0 Nm of holding torque to lock vertical axes when system power is removed and prevent uncommanded motion.
Mounting to a machine frame is simplified by a 130 mm centering diameter and a two-hole flange circle of 140 / 150 mm. Windings are insulated to Class F, and normal service is specified for ambient air from 0 to 40 °C. The absolute feedback system tracks position across Absolute (>4096 revolutions) without battery support, and optical scanning of a digital scale supplies the drive with multi-turn data. The motor has a plain shaft with a factory-installed seal, and power leads exit on side B through an output connector. It uses motor size 093 with length code C and winding code 058. Allowable storage ranges from -20 to +80 °C, and operation is permitted up to 1000 m above mean sea level.
Frequently Asked Questions about MHD093C-058-PG1-BN:
Q: What type of cooling does the MHD093C-058-PG1-BN motor use?
A: The MHD093C-058-PG1-BN features liquid cooling for optimal temperature control during operation.
Q: Does the MHD093C-058-PG1-BN include a holding brake, and what is its torque?
A: This motor is equipped with a holding brake, providing a holding torque of 22.0 Nm.
Q: What is the IP rating of the MHD093C-058-PG1-BN motor?
A: It offers an IP65 degree of protection for safeguarding against dust and water ingress.
Q: What type of shaft and shaft seal does the MHD093C-058-PG1-BN motor have?
A: The shaft on this model is of plain design and includes a shaft seal for additional protection.
Q: What type of encoder and position detection does the MHD093C-058-PG1-BN motor use?
A: The MHD093C-058-PG1-BN uses a digital servo feedback system with an integrated optical encoder for absolute position detection over more than 4096 revolutions.
