MHD093C-058-PG0-AN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911283054
The Bosch Rexroth Indramat MHD093C-058-PG0-AN is a servo motor from the MHD Synchronous Motors series with a plain shaft and liquid cooled housing. This motor provides a continuous torque at standstill of 23.0 Nm, features IP65 degree of protection, and has a digital servo feedback encoder for absolute position detection over more than 4096 revolutions. It supports operating ambient temperatures from 0 to 40 °C and does not include a holding brake.
Internal Product Review
The MHD093C-058-PG0-AN is a Bosch Rexroth Indramat servo motor with liquid cooling and IP65 protection. Digital servo feedback with integrated encoder and absolute position detection beyond 4096 revolutions support highly consistent motion control. Continuous standstill torque of 23.0 Nm makes the unit a strong choice for precision servo applications.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD093C-058-PG0-AN is a servo motor produced by Bosch Rexroth Indramat within the MHD Synchronous Motors series. It converts electrical power from a drive controller into precise rotary motion for automated axes, material-handling gantries, and packaging equipment. The unit’s construction supports high duty cycles in position-controlled industrial automation cells. This makes it suitable for positioning tasks that require repeatable motion and stable torque response during frequent acceleration and deceleration.
This motor develops a continuous standstill torque of 23.0 Nm, enabling stable holding and low-speed operation of heavy loads without thermal overload. Its enclosure carries an IP65 rating, so dust ingress is prevented and low-pressure water jets do not affect the internal windings during washdown cycles. Heat is removed through liquid cooling, permitting higher current density than air-cooled frames of comparable size. The motor has a centering diameter of 130 mm and a mounting flange of 140 / 150 mm, which supports installation on compatible IEC flanges. It is supplied in length class C and uses winding code 058 to match the electrical characteristics expected by compatible drive regulators. A plain shaft transmits torque directly, the power leads exit on side A through an output connector, and position feedback is gathered optically by the integrated digital servo feedback encoder, allowing absolute position monitoring beyond 4096 revolutions.
In operation, the feedback system delivers a system accuracy of ± 0.5 angular minutes, and reliable service is maintained between 0 to 40 °C ambient. For long-term storage, the unit tolerates temperatures from -20 to +80 °C without harming the magnets or insulation. Installations up to 1000 m above sea level do not require derating, and the internal insulation complies with class F, supporting winding temperatures typical of continuous-duty motors. A shaft seal helps block oil splash at the output journal, and reduced rotor inertia supports quick start-stop cycles.
