MHD093C-035-PP2-BA Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911317437
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MHD093C-035-PP2-BA is a servo motor from the MHD Synchronous Motors series with a continuous torque at standstill of 23.0 Nm and a holding brake torque of 32.0 Nm. It features a keyed shaft, IP65 protection, and uses digital servo feedback with an integrated encoder for absolute position detection over more than 4096 revolutions. This model supports natural convection cooling and is built with an F class insulation.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD093C-035-PP2-BA servo motor is produced by Bosch Rexroth Indramat as part of the MHD Synchronous Motors series. It is a three-phase rotary actuator intended for closed-loop industrial axes where precise velocity and position control are required during indexing, transfer, and synchronized motion tasks. When paired with a compatible drive, it converts electrical energy into controlled mechanical torque that moves tooling, conveyors, or gantry elements in automated machinery. This makes it suitable for equipment that depends on repeatable motion and stable feedback response during continuous operation.
The motor has a centering diameter of 130 mm and a flange that matches 140 / 150 mm mounting patterns, which helps it fit common 093-frame machine interfaces. Under rated conditions, the rotor provides a continuous standstill torque of 23.0 Nm, and the housing is sealed to IP65 to keep dust and water jets away from internal parts. Cooling is handled by natural convection, so the motor can operate without forced airflow in ambient temperatures from 0 to 40 °C. During storage, it can remain between -20 and +80 °C, and the keyed shaft includes an integral shaft seal to support reliable coupling and help limit contamination. The flange layout also supports direct mounting to machine plates or gearbox faces.
Position feedback comes from a digital servo encoder with optical scanning and absolute measurement beyond 4096 revolutions, contributing to a system accuracy of ± 0.5 angular minutes. The winding uses insulation class F and is suitable for installation heights up to 1000 m above mean sea level without derating. A factory-installed holding brake supplies 32.0 Nm of static torque to hold vertical loads when power is removed. Power leads exit through a connector on side B, which helps keep cable routing orderly in compact machine layouts. The 093 frame with length code C gives the motor a balanced combination of inertia and output for general servo applications.
