MHD093C-035-PP1-BN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911280610
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
14 Seconds
The Bosch Rexroth Indramat MHD093C-035-PP1-BN is a servo motor with liquid cooling and an IP65 degree of protection, part of the MHD Synchronous Motors series. It delivers a continuous torque at standstill of 23.0 Nm and features a keyed shaft with a holding brake offering 22.0 Nm of brake torque. The motor includes a digital servo feedback encoder and supports absolute position detection for more than 4096 revolutions.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD093C-035-PP1-BN is a servo motor produced by Bosch Rexroth Indramat within the MHD Synchronous Motors series. It is intended for closed-loop industrial automation where repeatable rotary positioning is required. The motor integrates an absolute digital servo feedback encoder, allowing the connected drive controller to track shaft position across more than 4096 revolutions without homing. A keyed shaft and an output connector on side B simplify mechanical coupling and electrical hookup on packaging lines, gantry axes, and similar motion assemblies.
At standstill, the rotor can continuously supply 23.0 Nm of torque, a level suited for mid-range feed drives that must hold a load without overheating. The housing carries an IP65 rating, so dust ingress and water jets do not disturb the internal windings or bearings during washdown operation. Heat is removed through liquid cooling, permitting high power density even when ambient air is stagnant. Position feedback reaches a resolution of ± 0.5 angular minutes, supporting precise contouring on machining centers. Electrical characteristics follow winding code 035, which indicates the resistance and inductance used with the matching drive for stable current control. The motor uses size 093, length C, and a 140 / 150 mm flange outline that sets the mechanical envelope.
The centering diameter of 130 mm aligns the motor precisely with adjacent machine frames, reducing imbalance at higher speeds. A holding brake delivers 22.0 Nm to secure vertical axes when power is removed, and the shaft seal helps keep coolant spray out of the bearing chamber. Thermal endurance is classified as F, allowing winding temperatures up to 155 °C, and the permissible ambient operating temperature is 0 to 40 °C. The motor can be stored from -20 °C to +80 °C and installed up to 1000 m above mean sea level. Its optical measurement method maintains absolute position data even after long storage.
Frequently Asked Questions about MHD093C-035-PP1-BN:
Q: What type of encoder and position detection does the MHD093C-035-PP1-BN motor use?
A: This model features a digital servo feedback encoder with integrated absolute position detection exceeding 4096 revolutions.
Q: Does the MHD093C-035-PP1-BN come with a holding brake and what is its torque?
A: A holding brake is included and provides a holding torque of 22.0 Nm.
Q: How is the MHD093C-035-PP1-BN motor cooled?
A: The MHD093C-035-PP1-BN is designed for direct liquid cooling to manage heat during operation.
Q: What is the degree of protection for the MHD093C-035-PP1-BN?
A: The degree of protection is IP65, meaning the motor is dust-tight and protected against low-pressure water jets.
Q: What is the continuous standstill torque of the MHD093C-035-PP1-BN?
A: The continuous torque at standstill for this model is rated at 23.0 Nm.
