Product Description:

The MHD093C-035-PP0-AN is a servo motor produced by Bosch Rexroth Indramat for the MHD Synchronous Motors series. It is designed to drive rotary axes in automated machinery where closed-loop speed and position control are required. When paired with a compatible drive controller, the internal position transducer supports precise torque delivery and fast dynamic response for packaging lines, handling systems, and metal-cutting equipment. This arrangement allows the axis to follow commanded motion profiles accurately during starting, stopping, and changes in load.

This model sustains a continuous standstill torque of 23.0 Nm, allowing it to hold commanded loads at zero speed without excessive heating. Accurate mechanical alignment is supported by a centering diameter of 130 mm, and the mounting face uses dual bolt circles of 140 / 150 mm to fit common machine interfaces. Heat is removed through liquid cooling, which carries thermal energy away from the stator and supports higher current density than self-cooled designs. The motor uses winding code 035, so the matching drive can be set for the proper electrical behavior during current and speed control.

Torque is transmitted through a keyed shaft, which helps prevent slip between the motor and the driven component. Power leads terminate in an output connector, and the connection is oriented on side A to support fixed cable routing within the machine. Position data is supplied by absolute feedback for more than 4096 revolutions, so the control system can retain multi-turn position information immediately after power-up. A shaft seal helps block coolant or oil ingress at the output end. The motor is supplied without a holding brake, so any vertical or suspended load must be secured by the driven mechanism or by drive-controlled holding torque when power is removed.