Product Description:

The MHD093C-035-PG2-BA is a servo motor manufactured by Bosch Rexroth Indramat within the MHD Synchronous Motors series. It serves as an electromechanical actuator in automated production cells, where it converts drive current into precisely metered rotary motion for tool axes, gantries, or conveyors. Position data are captured by an integrated absolute sensor with multi-turn capability of more than 4096 revolutions, allowing the controller to synchronize this motor with other axes without external encoders.

During continuous standstill, the motor can deliver 23.0 Nm of torque, which is available for static load holding or low-speed positioning. The housing seats into a centering recess of 130 mm, while the motor mounts on a square flange that spans 140 / 150 mm; these dimensions help align the shaft concentrically with attached mechanics. Rotor angle is reported through digital servo feedback with integrated encoder, enabling real-time correction of position error by the drive. Heat created by copper losses is removed through natural convection, so no external blower or liquid circuit is required, which is useful in cabinets where auxiliary cooling space is limited. The winding code for this unit is 035, matching its electrical constants to drives that can supply the rated current.

For stop-state security, the built-in brake supplies 32.0 Nm, ensuring the axis remains fixed when power is removed or during emergency stops. A plain shaft simplifies coupling to gearboxes or belt pulleys, and a shaft seal is present to limit dust or oil ingress at the output. Power is routed through an output connector oriented to side B, which keeps cabling clear of adjacent machinery. The frame size is denoted as 093, and the length code C adds stack height for higher magnetic torque without altering the mounting footprint.