MHD093C-035-NP1-BA Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911289557
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MHD093C-035-NP1-BA is a servo motor from the MHD Synchronous Motors series. It features digital servo feedback, a holding brake with 22 Nm torque, and a keyed shaft with a shaft seal. The motor has a continuous standstill torque of 23 Nm, a centering diameter of 130 mm, and uses natural convection for housing cooling.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD093C-035-NP1-BA is a servo motor manufactured by Bosch Rexroth Indramat and assigned to the MHD Synchronous Motors series. Within a multi-axis system it receives three-phase power from a drive controller and converts that energy into precisely commanded mechanical rotation. The unit is intended for feed axes, handling modules, and other automation stations where accurate speed and position regulation are necessary for product quality and cycle-time repeatability.
Installation and continuous operation parameters are defined by several mechanical and thermal figures. A centering diameter of 130 mm keeps the housing concentric with a gearbox or machine frame, while the 140 / 150 mm flange pattern provides versatile bolt spacing. Under rated current the rotor delivers 23.0 Nm of continuous torque at standstill, giving stable thrust for slow feeds or static holding without external cooling because the ribbed housing dissipates heat through natural convection. Power is transmitted through a keyed shaft that prevents slippage under load. Feedback is generated by a digital servo feedback (HSF) encoder, enabling drive electronics to close high-resolution control loops. Motor size 093, length code C, and winding code 035 together specify the magnetic stack height and wire gauge used in this model.
Dynamic stopping and power-off holding are handled by an internal brake rated at 22.0 Nm. The main power leads depart toward side B, and an integrated output connector streamlines replacement without re-terminating cables. There is a shaft seal that prevents coolant or oil from reaching the frontal bearing. Position information is provided on a relative basis, so the axis must complete a homing routine after every power cycle to set its absolute zero. These characteristics make the unit integrate cleanly into packaging, printing, and material-handling equipment.
Frequently Asked Questions about MHD093C-035-NP1-BA:
Q: What is the continuous torque at standstill for the MHD093C-035-NP1-BA motor?
A: The MHD093C-035-NP1-BA delivers a continuous torque of 23.0 Nm at standstill.
Q: Does the MHD093C-035-NP1-BA servo motor include a holding brake?
A: This motor is equipped with a holding brake that provides a holding torque of 22.0 Nm.
Q: What is the shaft configuration of the MHD093C-035-NP1-BA motor?
A: The shaft on the MHD093C-035-NP1-BA features a key and includes a shaft seal for added protection.
Q: What type of encoder does the MHD093C-035-NP1-BA servo motor use for position detection?
A: Position detection on this model is handled by a digital servo feedback (HSF) encoder offering relative feedback.
Q: How is the MHD093C-035-NP1-BA motor cooled?
A: The MHD093C-035-NP1-BA uses natural convection housing cooling.
