Product Description:

The MHD093C-024-PP0-BA is a servo motor produced by Bosch Rexroth Indramat for the MHD Synchronous Motors series. As a rotary actuator, it delivers closed-loop motion to industrial axes that require exact positioning and repeatable speed control within automated machinery. Its keyed output shaft couples directly to gearboxes or load elements, while the integrated optical encoder feeds position data to the drive controller.

At standstill, the motor can supply 23.0 Nm of continuous torque, allowing stable holding force without overheating. Protection level IP65 seals the housing against dust and low-pressure water jets, so the unit can be mounted near the process. Heat is removed only by natural convection, eliminating the need for forced-air ducts. Digital servo feedback uses an integrated optical encoder and provides a system accuracy of ± 0.5 angular minutes. The encoder provides absolute position tracking over more than 4096 revolutions, giving the axis a ready reference after power-up. A centering diameter of 130 mm mates with 140/150 mm flange holes, and the keyed shaft transfers torque without slip. The power connector exits toward side B, which supports orderly cable routing.

The motor can operate in ambient temperatures from 0 to 40 °C and can be stored from -20 to +80 °C. Class F insulation handles internal winding temperatures, and a shaft seal helps keep lubrication in place while blocking contaminants. Installation is permitted up to 1000 m above mean sea level without derating, aided by the C-length stator in the 093 frame. Because no holding brake is fitted, applications that require static locking must rely on drive torque or external clamps. This unit carries winding code 024, which indicates the electrical resistance and inductance values used with matching Bosch Rexroth drives.