MHD093C-024-PG0-BA Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911319987
The Bosch Rexroth Indramat MHD093C-024-PG0-BA is a servo motor from the MHD Synchronous Motors series, featuring 23.0 Nm continuous torque at standstill and a plain shaft with a shaft seal. It has a digital servo feedback encoder with absolute position detection for over 4096 revolutions, and is protected with an IP65 rating and natural convection housing cooling. The motor operates in ambient temperatures from 0 to 40 °C and fits a flange size of 140 or 150 mm.
Internal Product Review
The MHD093C-024-PG0-BA is a Bosch Rexroth Indramat servo motor that stands out for precise motion control with digital servo feedback and absolute position detection. Natural convection cooling and IP65 protection support dependable service in demanding industrial environments. Continuous standstill torque of 23.0 Nm and system accuracy of ±0.5 angular minutes make the motor an excellent choice for high-confidence positioning tasks.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD093C-024-PG0-BA is a servo motor produced by Bosch Rexroth Indramat as part of the MHD Synchronous Motors series. It supplies rotary motion for automated machinery and uses digital servo feedback with an integrated encoder to send absolute position data to the drive controller. This makes the motor suitable for positioning axes, indexing tables, and feed drives that require repeatable motion. A plain shaft eases direct coupling, while shipment without a holding brake means external mechanisms must secure loads when power is off. The housing supports natural airflow, and the output connector is routed on side B to help keep power cables clear of moving parts.
It can sustain 23.0 Nm of torque at standstill without overheating. The flange pattern of 140/150 mm and a 130 mm centering diameter align with common mounting faces for secure installation. An enclosure rating of IP65 blocks dust and water jets, so the motor can be used in areas exposed to spray. Heat leaves the stator through natural convection, so installation space must allow free air circulation around the housing. Class F insulation tolerates winding temperatures up to 155 °C and helps protect the windings during continuous operation. The optical encoder is integrated into the motor housing, which keeps the feedback package compact.
Proper service requires an ambient range of 0 to 40 °C and operation at elevations no higher than 1000 m above sea level so passive cooling can work as intended. A shaft seal helps maintain the enclosure during light spray exposure, and the build matches the MHD093 mechanical envelope with size 093, length code C, and winding code 024. Closed-loop accuracy reaches ±0.5 angular minutes because the feedback device provides absolute multiturn feedback of more than 4096 revolutions. This feedback arrangement lets the drive know shaft position after power-up and reduces the need for a homing move. Storage from -20 to +80 °C is permitted when the motor is not in operation.
