Product Description:

The MHD093C-024-NP0-LA is a servo motor produced by Bosch Rexroth Indramat within the MHD Synchronous Motors series. Designed for closed-loop industrial automation, it converts electrical energy into controlled rotary motion for positioning and velocity tasks on gantries, packaging equipment, and transfer lines. The unit integrates a rotor-stator set engineered for rapid dynamic response and is intended to be driven by Rexroth digital amplifiers that read its internal feedback.

At standstill the motor supplies a continuous torque of 23.0 Nm, allowing it to hold process loads without overheating. The housing carries a IP65 rating, so internal components remain protected against dust ingress and low-pressure water jets. Position data is delivered through Digital servo feedback (HSF), enabling high-speed control loops. Mounting is simplified by a flange pattern of 140 / 150 mm and a centering diameter of 130 mm, which set the mechanical interface to the machine frame. The motor operates in ambient temperatures from 0 to 40 °C and dissipates heat by natural convection, eliminating the need for forced-air or liquid cooling. A keyed shaft transfers torque directly to couplings or pulleys while maintaining rotational alignment.

Additional parameters set service limits and installation rules. The windings follow code 024, and Class F insulation supports winding temperatures up to 155 °C during cyclic duty. System precision is characterized by a total accuracy of ± 0.5 angular minutes, obtained with an optical measurement method that provides relative position signals. The motor is supplied without a holding brake, relies on a shaft seal to restrict lubricant egress, and may be stored between −20 and +80 °C. It can be mounted up to 1000 m above mean sea level, uses size 093 stator laminations with length design C, and its power connector is oriented to the left to match cabinet layouts.