MHD093C-024-NG1-AA Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911313132
The Bosch Rexroth Indramat MHD093C-024-NG1-AA is a servo motor from the MHD Synchronous Motors series and has a continuous torque at standstill of 23.0 Nm with a holding brake torque of 22.0 Nm. It features a plain shaft, IP65 degree of protection, and uses digital servo feedback for encoder type. The motor has a centering diameter of 130 mm and relies on natural convection for housing cooling.
Internal Product Review
The MHD093C-024-NG1-AA is a Bosch Rexroth Indramat servo motor with natural convection cooling and IP65 protection. Digital servo feedback (HSF) and optical relative position detection support accurate, stable motion control. A 23.0 Nm continuous standstill torque and 22.0 Nm holding brake torque make the motor an excellent fit for demanding axis applications.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD093C-024-NG1-AA is a servo motor produced by Bosch Rexroth Indramat for the MHD Synchronous Motors series. As an AC-fed rotary actuator, the unit converts drive controller commands into precise mechanical rotation for positioning and velocity tasks in automated machinery. Its relative position detection and digital feedback interface support closed-loop regulation in packaging lines, handling robots, and similar equipment. Because feedback is integrated in the motor, the control system receives position data without a separate measuring assembly, which helps keep the drive package compact.
At standstill, the motor can deliver a 23.0 Nm continuous torque, which allows it to maintain axis preload during holding or tensioning duties without excessive heat buildup. A double-pilot flange of 140 / 150 mm supports mounting on machine faces that use either pilot dimension. The housing is sealed to IP65 and uses natural convection cooling, so dust and water jets are kept away from internal parts without added fan hardware. Position feedback is supplied by digital servo feedback (HSF) with optical sensing, and the motor is intended for ambient temperatures from 0 to 40 °C. The sealed, fanless layout is useful on machines where space is limited and exposed surfaces may be subject to routine cleaning.
The integrated holding brake supplies 22.0 Nm of static torque, keeping the shaft secure when power is removed. Overall positioning precision reaches ± 0.5 angular minutes, and the flange pilot of 130 mm supports concentric alignment between the motor and the driven load. Storage is permitted from –20 to +80 °C, and installation is allowed up to 1000 m above mean sea level. Winding code 024 corresponds to the electrical profile expected by the matching drive, while Insulation Class F windings, the size 093 length C housing, a side A output connector, and a shaft seal complete the configuration. Routing the connector to side A can also simplify cable placement when the motor is installed near adjacent machine structures.
