MHD093C-024-NG0-AA Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911311706
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
22 Seconds
The Bosch Rexroth Indramat MHD093C-024-NG0-AA is a servo motor from the MHD Synchronous Motors series. It has a plain shaft design with a shaft seal and features a continuous torque at standstill of 23.0 Nm. The motor uses digital servo feedback, has a flange size of 140/150 mm, and is cooled by natural convection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD093C-024-NG0-AA is a servo motor produced by Bosch Rexroth Indramat within the MHD Synchronous Motors series. Designed for automated machining centers, pick-and-place modules, and packaging lines, the unit transforms drive current into controlled rotary motion so position loops can be closed quickly and repeatably. The motor has size 093 and length code C, giving it a moderate inertia profile that fits medium-load gantries without oversizing the axis. Its synchronous design helps the drive maintain stable torque response during acceleration, deceleration, and low-speed positioning. Because the motor is supplied without a holding brake, the axis must be held by drive torque or an external clamping device when power is removed.
The mechanical interface starts with a centering diameter of 130 mm, ensuring concentric alignment between the motor flange and the driven machine plate. The flange uses a pattern of 140 / 150 mm, a standardized bolt circle that simplifies interchange with other motors in the same power class. At standstill, the rotor can deliver 23.0 Nm of continuous torque, allowing the axis to resist machining forces without overheating. Position feedback is supplied by digital servo feedback (HSF), which streams high-resolution incremental data for fast velocity loops. The encoder signal lets the drive correct speed deviations quickly when the load changes. Heat generated in the winding is removed through natural convection, so no auxiliary blower or liquid circuit is needed during rated duty.
Electrical power reaches the stator through an output connector mounted on the housing and positioned on side A, keeping cable bends away from moving machine elements. This layout supports cleaner cable routing in compact machine spaces. The copper winding uses code 024, which indicates the voltage constant and matches the motor to compatible Indramat drive modules. A plain shaft transmits torque without keyways, favoring clamp couplings that minimize backlash, and a shaft seal is fitted to block lubricant ingress. Relative position detection is supported by internal electronics, complementing the encoder during startup and reference moves.
Frequently Asked Questions about MHD093C-024-NG0-AA:
Q: What is the continuous torque at standstill rating for the MHD093C-024-NG0-AA?
A: The MHD093C-024-NG0-AA provides 23.0 Nm of continuous torque at standstill.
Q: What encoder type is included with the MHD093C-024-NG0-AA motor?
A: This motor uses digital servo feedback (HSF) for position detection.
Q: What cooling method is employed by the MHD093C-024-NG0-AA motor housing?
A: The housing of the MHD093C-024-NG0-AA is cooled using natural convection.
Q: What type of shaft design does the MHD093C-024-NG0-AA motor have?
A: A plain shaft with a shaft seal is utilized on this model for its output.
Q: Is the MHD093C-024-NG0-AA supplied with a holding brake?
A: This motor is manufactured without a holding brake.
