MHD093B-058-PP2-BA Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911342819
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
37 Seconds
The Bosch Rexroth Indramat MHD093B-058-PP2-BA is a servo motor with digital servo feedback and an integrated encoder, belonging to the MHD Synchronous Motors series. It features a continuous torque at standstill of 17.5 Nm and comes with a keyed shaft and holding brake with 32.0 Nm torque. The motor is rated IP65 for protection and uses natural convection for housing cooling.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD093B-058-PP2-BA is a servo motor produced by Bosch Rexroth Indramat as part of the MHD Synchronous Motors series. It uses a 093 frame with B length and transmits torque through a keyed shaft, so it can be mounted directly to mechanical loads. Classified as a servo actuator for industrial automation, it uses an output connector for its power interface and fits applications that require precise closed-loop rotation on packaging, machining, and material-handling axes.
During steady-state operation, the motor can supply 17.5 Nm of continuous stall torque. It uses a centering diameter of 130 mm and a 140/150 mm flange pattern for rigid machine mounting. The motor has an IP65 protection rating, and heat is removed by natural convection, eliminating the need for auxiliary fans. A shaft seal is fitted to protect the interior bearings. The digital servo feedback system, which uses an integrated encoder with optical evaluation, supports system accuracy of ±0.5 angular minutes. Position and power conductors exit on side B through the output connector, and the 058 winding code matches the electrical characteristics used by standard Indramat drives. The unit can be installed up to 1000 m above sea level, and the housing allows natural airflow around the stator.
A permanent-magnet holding brake is factory installed and delivers 32.0 Nm of static torque for controlled stops and power-off holding. Continuous duty is permitted across an ambient range of 0 to 40 °C, while storage or transport temperatures may range from -20 °C to 80 °C without damage. Class F insulation permits winding temperatures up to 155 °C. The feedback system provides absolute multi-turn position detection of more than 4096 revolutions, enabling multi-turn referencing without battery backup.
Frequently Asked Questions about MHD093B-058-PP2-BA:
Q: What is the continuous standstill torque of the MHD093B-058-PP2-BA motor?
A: The MHD093B-058-PP2-BA servo motor provides a continuous torque of 17.5 Nm at standstill.
Q: Does the MHD093B-058-PP2-BA have a holding brake, and what is its torque?
A: This model is equipped with a holding brake rated at 32.0 Nm.
Q: What type of encoder and position detection does the MHD093B-058-PP2-BA servo motor use?
A: The encoder uses digital servo feedback with integrated absolute position detection for more than 4096 revolutions.
Q: Where is the power connection located on the MHD093B-058-PP2-BA and what type is it?
A: The power connection on this servo motor is located on side B and uses an output connector.
Q: What is the degree of protection for the MHD093B-058-PP2-BA motor?
A: This motor is rated with IP65 degree of protection, offering resistance to dust and low-pressure water jets.
