MHD093B-058-NP0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
6 Seconds
The Bosch Rexroth Indramat MHD093B-058-NP0 is a servo motor from the MHD Synchronous Motors series with a continuous standstill torque of 17.5 Nm. It features a keyed shaft with a shaft seal, a centering diameter of 130 mm, and uses digital servo feedback for position detection. This model does not include a holding brake and comes with a flange size of 140 or 150 mm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD093B-058-NP0 servo motor is manufactured by Bosch Rexroth Indramat and belongs to the MHD Synchronous Motors series. This permanent-magnet unit works with digital drive controllers to convert three-phase electrical power into controlled rotary motion for machine tools, printing lines, and material-handling systems. Its connector arrangement supports integration into established drive systems, and the motor is suited for continuous-duty operation in equipment that requires repeatable speed and position control. The design focuses on stable servo response during cyclic motion, dwell periods, and frequent direction changes.
The mounting interface uses a centering diameter of 130 mm, which helps align the motor flange with a gearbox or machine face. The flange also uses a 140 / 150 mm bolt pattern square, allowing compatibility with common mounting layouts. Under continuous stall conditions, the stator delivers 17.5 Nm of torque for axes that must hold load steadily at low speed or at standstill. The motor is supplied without a holding brake, so any static load must be retained by external clamping or commanded drive torque. Rotor position is monitored through Digital servo feedback (HSF), which sends high-resolution incremental data to the controller for precise commutation and closed-loop regulation.
The housing uses Motor Length B, which gives the 93 mm frame a deeper active stack for added thermal capacity. The frame size is 093, placing the motor within the mechanical envelope used by other units in the same family size. Torque is transmitted through a keyed shaft, allowing secure coupling to pulleys, couplings, or similar driven elements. A shaft seal helps keep coolant and lubricant away from the bearing area during operation. The 058 winding is matched to compatible Indramat inverter operation, supporting a practical balance between current demand and operating speed range.
Frequently Asked Questions about MHD093B-058-NP0:
Q: What is the continuous torque at standstill for the MHD093B-058-NP0 motor?
A: The MHD093B-058-NP0 features a continuous torque at standstill of 17.5 Nm, suitable for sustained operations.
Q: What type of encoder is used in the MHD093B-058-NP0 servo motor?
A: This model uses digital servo feedback (HSF) for its encoder, providing reliable position detection.
Q: What shaft design does the MHD093B-058-NP0 motor include?
A: A keyed shaft design is provided on the MHD093B-058-NP0 for robust mechanical coupling.
Q: Does the MHD093B-058-NP0 servo motor include a holding brake?
A: This model does not come equipped with a holding brake from the manufacturer.
Q: Is a shaft seal included with the MHD093B-058-NP0 motor?
A: A shaft seal is included to help protect the MHD093B-058-NP0 from contaminants at the shaft opening.
