MHD093B-035-PP2-BN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911318548
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
55 Seconds
The Bosch Rexroth Indramat MHD093B-035-PP2-BN is a servo motor from the MHD Synchronous Motors series with a keyed shaft design and a flange size of 140 or 150 mm. It features liquid cooling, a holding brake with 32 Nm torque, and absolute position detection for more than 4096 revolutions. The motor uses digital servo feedback with an integrated encoder and provides 17.5 Nm of continuous torque at standstill.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD093B-035-PP2-BN is a servo motor built by Bosch Rexroth Indramat and assigned to the MHD Synchronous Motors series. In automated transfer lines, pick-and-place modules, and packaging stations, it supplies controlled rotary torque that replaces pneumatic or hydraulic actuators. The unit’s closed-loop operation, based on an integrated encoder and drive-side current regulation, allows precise speed, position, and acceleration control that remains repeatable across millions of cycles in industrial production. It occupies the 093 frame class, giving a compact footprint while still meeting mid-range force requirements in space-limited machine layouts.
The motor delivers a continuous standstill torque of 17.5 Nm, allowing it to hold loads without overheating during static clamping or low-speed positioning. A centering diameter of 130 mm forms the pilot fit between the motor flange and machine frame, helping maintain concentric alignment. The rectangular flange uses the 140 / 150 mm bolt pattern, which supports direct installation on compatible machine faces in this frame size. Heat produced in the windings is removed through liquid cooling, which maintains a stable winding temperature during high duty cycles and permits higher power density than air-cooled models. Electrical behavior is tied to winding code 035, which corresponds to the resistance and inductance values required by the compatible drive for correct current control.
Mechanical holding power is provided by an integrated brake rated at 32.0 Nm, so vertical axes remain locked when the drive is de-energized. Absolute position detection spanning more than 4096 revolutions is achieved by the digital servo feedback encoder, eliminating the need for homing after power loss. Output torque is transmitted through a keyed shaft, and a shaft seal protects the bearing cavity from coolant splash. The power connector is located on side B, simplifying cable routing where space beside the motor is limited, and the sealed output connector allows cable connection without opening a junction box.
Frequently Asked Questions about MHD093B-035-PP2-BN:
Q: What is the continuous torque at standstill for the MHD093B-035-PP2-BN motor?
A: The MHD093B-035-PP2-BN motor has a continuous standstill torque of 17.5 Nm.
Q: What type of encoder does the MHD093B-035-PP2-BN motor use?
A: This model features digital servo feedback with an integrated encoder for precise motion control.
Q: Does the MHD093B-035-PP2-BN include a holding brake, and what is its torque?
A: The MHD093B-035-PP2-BN motor is equipped with a holding brake that provides 32.0 Nm of torque.
Q: What type of housing cooling does the MHD093B-035-PP2-BN motor use?
A: The housing is liquid-cooled, supporting high performance during extended operation.
Q: What shaft design and sealing features are present on the MHD093B-035-PP2-BN motor?
A: A keyed shaft and shaft seal are included to allow secure and protected mechanical connections.
