Product Description:

The MHD093B-035-PP2-BA is a servo motor produced by Bosch Rexroth Indramat as part of the MHD Synchronous Motors series. Designed for closed-loop industrial automation, it converts drive current into controlled rotary motion for positioning axes, conveyors, and pick-and-place stations in packaging and handling equipment. An integrated digital encoder supports the feedback loop, allowing the motor to maintain repeatable accuracy in demanding motion tasks and stable response during speed changes.

This motor can deliver a continuous standstill torque of 17.5 Nm, meaning it sustains that twisting force indefinitely without exceeding its thermal limits. For load holding during power-off states, the built-in brake applies up to 32.0 Nm of static torque. This torque level is useful on axes that must resist process forces at zero speed. Thermal energy leaves the assembly through natural convection, so no external blower is required where cabinet airflow is restricted. The centering diameter is 130 mm, which aligns the stator precisely with machine mounts, and a flange size of 140 / 150 mm provides two common bolt patterns for direct installation on machine flanges or adapter plates.

A keyed shaft transfers torque without slip and is protected by a shaft seal that keeps lubricants inside and contaminants out. Position detection uses absolute feedback over more than 4,096 revolutions, eliminating the need for homing after startup and shortening machine cycle times. Power enters through an output connector oriented on side B, simplifying cable runs in cabinets where the opposite side is crowded. This connector position can help separate motor leads from nearby moving assemblies. The winding code 035 matches drive amplifiers that supply the required current density while staying below the motor's thermal threshold.