MHD093B-035-PP1-BN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911277730
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
57 Seconds
The Bosch Rexroth Indramat MHD093B-035-PP1-BN is a servo motor from the MHD Synchronous Motors series with a continuous torque at standstill of 17.5 Nm and a keyed shaft design. It features a 22 Nm holding brake, liquid cooling housing, and an integrated digital servo feedback encoder for absolute position detection over more than 4096 revolutions. The motor has a centering diameter of 130 mm and a flange size of 140 or 150 mm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Bosch Rexroth Indramat produces the MHD093B-035-PP1-BN as part of the MHD Synchronous Motors series. This product is a brushless AC servo motor that converts electrical input into controlled rotary motion for automated equipment such as packaging stations, material-handling gantries, and machining centers. Within an Indramat drive system, the motor supplies programmable torque, speed, and position so that machine axes follow command profiles precisely, enabling repeatable production cycles and high positional accuracy.
The motor's mechanical and thermal ratings affect how it is installed and loaded. It delivers a continuous standstill torque of 17.5 Nm, allowing axes to hold static loads without additional gearing. Heat generated by this torque is removed through a liquid cooling jacket that circulates coolant around the stator, permitting higher power density than air-cooled designs. The mounting interface uses a square flange of 140 / 150 mm with a concentric locating shoulder of 130 mm to keep the housing centered on the machine frame. Rotor position is reported by digital servo feedback that streams incremental and serial data to the drive for closed-loop control. Power enters the motor through an output connector on side B, keeping the cable run away from adjacent moving parts and simplifying cabinet routing.
The auxiliary features support holding, sealing, and position measurement. A spring-applied brake supplies 22.0 Nm of static torque so vertical or suspended loads stay in position when the drive is disabled. Torque is transferred through a keyed shaft, which provides positive mechanical engagement with couplings or pulleys, while a shaft seal helps prevent fluid ingress during washdown duty. For multi-turn applications, the integrated encoder provides absolute position tracking for more than 4096 revolutions, letting the controller read position immediately after power-up without homing. Motor length B, frame size 093, and winding code 035 suit the electromagnetic package to drives that must accelerate heavy loads in continuous-duty environments.
Frequently Asked Questions about MHD093B-035-PP1-BN:
Q: What type of encoder and position detection does the MHD093B-035-PP1-BN motor use?
A: The MHD093B-035-PP1-BN features a digital servo feedback encoder with integrated absolute position detection for more than 4096 revolutions.
Q: What is the continuous standstill torque rating for the MHD093B-035-PP1-BN?
A: This model provides a continuous standstill torque of 17.5 Nm, suitable for demanding motion control tasks.
Q: Does the MHD093B-035-PP1-BN include a holding brake and what is its holding brake torque?
A: A holding brake is included on this motor, offering a brake torque of 22.0 Nm.
Q: What type of housing cooling does the MHD093B-035-PP1-BN utilize?
A: Liquid cooling is used for the housing, helping control motor temperature during operation.
Q: What shaft design and sealing are included in the MHD093B-035-PP1-BN motor?
A: The shaft has a key design and is equipped with a seal to enhance reliability against contaminants.
