MHD093B-035-PP1-AN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911283296
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
59 Seconds
The Bosch Rexroth Indramat MHD093B-035-PP1-AN is a servo motor in the MHD Synchronous Motors series with liquid cooling and an IP65 protection rating. It features a keyed shaft design, a holding brake with 22 Nm torque, and a digital servo feedback encoder for absolute position detection. The motor delivers a continuous torque of 17.5 Nm at standstill and operates in ambient temperatures from 0 to 40 °C.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD093B-035-PP1-AN is a three-phase servo motor produced by Bosch Rexroth Indramat within the MHD Synchronous Motors series. Designed for closed-loop drive systems, the unit converts commanded current from an Indramat drive into controlled mechanical torque and position for gantries, packaging stations, and material-handling axes. Its integrated absolute position sensor and keyed output shaft allow accurate load coupling while minimizing lost motion. This arrangement supports repeatable positioning on axes that start, stop, and reverse direction throughout normal machine cycles.
The motor provides a continuous standstill torque of 17.5 Nm, giving the axis enough holding force to resist external loads whenever the rotor is energized but stopped. A spring-applied brake is fitted, providing 22.0 Nm of static holding torque to secure vertical loads during power loss. Thermal regulation is assisted by liquid cooling, so the stator windings can remain within insulation class F limits during demanding duty cycles. The housing is sealed to IP65, which keeps out dust and protects against water jets so the motor can be mounted directly on the machine frame. The position feedback supports closed-loop accuracy of ± 0.5 angular minutes, helping limit cumulative error during multi-turn moves.
The motor seats on a centering pilot of 130 mm, and the square flange spans 140 / 150 mm to match common machine interfaces in this frame class. Power is routed through an output connector on side A, which can simplify cable routing when the motor is mounted close to nearby structures. A shaft seal is fitted to help keep cutting fluid and debris away from the bearing area. The motor operates in ambient temperatures of 0 to 40 °C and has a storage and transport range of -20 to +80 °C. Installation is permitted up to 1000 m above mean sea level.
Frequently Asked Questions about MHD093B-035-PP1-AN:
Q: What type of shaft design does the MHD093B-035-PP1-AN motor have?
A: This model features a keyed shaft design for mechanical connection.
Q: What is the holding brake torque of the MHD093B-035-PP1-AN?
A: The holding brake on this motor provides 22.0 Nm of torque.
Q: What degree of protection does the MHD093B-035-PP1-AN offer?
A: The MHD093B-035-PP1-AN has IP65 protection, making it resistant to dust and water jets.
Q: What type of cooling does the MHD093B-035-PP1-AN use?
A: This motor uses liquid cooling for its housing.
Q: What type of encoder and position detection does the MHD093B-035-PP1-AN use?
A: A digital servo feedback unit with an integrated encoder provides absolute position detection for more than 4096 revolutions.
