MHD093B-035-PP0-BA Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911292133
The Bosch Rexroth Indramat MHD093B-035-PP0-BA is a servo motor from the MHD Synchronous Motors series with a continuous torque at standstill of 17.5 Nm. It features a keyed shaft design, an IP65 protection rating, and system accuracy of ±0.5 angular minutes. The motor uses a digital servo feedback encoder with absolute position detection over more than 4096 revolutions and supports natural convection for housing cooling.
Internal Product Review
The MHD093B-035-PP0-BA is a Bosch Rexroth Indramat servo motor with natural convection cooling and IP65 protection. Digital servo feedback with an integrated encoder and absolute position detection beyond 4096 revolutions support precise closed-loop motion control. The 17.5 Nm continuous torque at standstill and ±0.5 angular minute system accuracy make the motor a highly capable choice for demanding servo axes.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD093B-035-PP0-BA belongs to the MHD Synchronous Motors series produced by Bosch Rexroth Indramat. It is a servo motor intended for closed-loop motion axes where rapid positioning and repeatability are required. The motor integrates digital servo feedback, allowing the drive to read precise rotor position data without external sensors and reducing wiring in automated assembly lines, packaging cells, and material-handling gantries.
The motor can sustain a continuous standstill torque of 17.5 Nm, so it maintains holding force without overheating during static load periods. Its enclosure carries an IP65 protection rating, which helps keep out dust and water jets when the motor is installed near machinery. Operation is permitted within 0 to 40 °C, and output derating or supplemental cooling is required outside that range. Heat is removed through natural convection, eliminating the need for forced airflow. A centering diameter of 130 mm matches standard flange registers for accurate shaft alignment with couplings or gearboxes. The motor uses a keyed shaft to transmit torque, and the shaft includes a seal to help block oil or coolant ingress along the journal.
Encoder accuracy is rated at ±0.5 angular minutes, supporting fine incremental moves in multi-axis gantries. Insulation class F permits winding temperatures up to 155 °C during cyclic duty. The square flange measures 140/150 mm, providing mounting holes for ISO motor adapters, and winding code 035 matches the electrical values used by compatible MHD drives. The encoder provides absolute position detection over more than 4,096 revolutions, so the axis can retain position information after power cycles without a homing routine. Power and feedback connectors exit on side B, and the unit is supplied without a holding brake. Storage temperatures from -20 °C to +80 °C and installation elevations up to 1,000 m above mean sea level are permitted.
