MHD093B-035-PP0-AN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911274577
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
20 Seconds
The Bosch Rexroth Indramat MHD093B-035-PP0-AN is a servo motor from the MHD Synchronous Motors series, featuring liquid cooling and a flange size of 140 or 150 mm. It delivers a continuous torque of 17.5 Nm at standstill and has IP65 degree of protection. The motor uses a digital servo feedback encoder with optical position detection and supports absolute accuracy above 4096 revolutions.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD093B-035-PP0-AN is an AC synchronous servo motor produced by Bosch Rexroth Indramat within the MHD Synchronous Motors series. Designed for tight integration with compatible digital drive controllers, it converts electrical energy into highly regulated rotary motion that supports positioning, velocity control, and coordinated process steps on automated production lines, gantry axes, and packaging machinery. Its closed-loop design supports accurate motion during repeated starts, stops, and speed changes.
At standstill the motor can sustain 17.5 Nm of continuous torque, giving machinery adequate holding force during low-speed machining and index pauses. Heat generated under dynamic duty is removed by a liquid cooling jacket, so full output can be maintained without external fans. The housing carries an IP65 seal that blocks dust and water jets often encountered in food, chemical, or washdown environments. Rotor angle is reported through digital servo feedback, and this integrated encoder streams exact position data to the drive for fast current-loop correction. Safe operation is supported across an ambient range of 0 to 40 °C, matching typical cabinet-ventilated shop floors. A centering diameter of 130 mm aligns the flange precisely to reducers or mechanical frames, and winding code 035 identifies the copper fill pattern used for drive matching.
The optical sensing path achieves a system accuracy of ± 0.5 angular minutes, while its multiturn register is absolute (>4096 revolutions), preventing loss of reference after extended shutdowns. Stator insulation is rated to insulation class F, enabling higher permissible winding temperatures when paired with the liquid circuit. Additional integration aids include a 140/150 mm flange pattern, a keyed shaft with a factory-installed seal, and an output connector on side A for straightforward cabling. The motor is supplied without a holding brake, tolerates storage from -20 °C to +80 °C, and can be installed up to 1000 m above mean sea level. It uses size 093 geometry and length B for medium-power forming, cutting, and pick-and-place equipment.
Frequently Asked Questions about MHD093B-035-PP0-AN:
Q: What type of cooling does the MHD093B-035-PP0-AN motor use?
A: The MHD093B-035-PP0-AN supports liquid cooling for its housing.
Q: What is the degree of protection for the MHD093B-035-PP0-AN motor?
A: This model has a degree of protection rated at IP65.
Q: What type of encoder is included with the MHD093B-035-PP0-AN motor?
A: Its encoder is a digital servo feedback system with an integrated encoder.
Q: What is the continuous torque at standstill for the MHD093B-035-PP0-AN?
A: The MHD093B-035-PP0-AN has a continuous torque at standstill of 17.5 Nm.
Q: What is the shaft design for the MHD093B-035-PP0-AN motor?
A: This motor comes with a keyed shaft and includes a shaft seal.
