Product Description:

The MHD093B-035-PP0 servo motor is built by Bosch Rexroth Indramat for the MHD Synchronous Motors series. It functions as a dynamic torque source in conveyors, pick-and-place heads, and forming stations that depend on rapid positioning cycles. When paired with a suitable drive controller, the motor converts regulated current into commanded shaft motion, supporting closed-loop industrial automation tasks.

Mechanically, the motor can deliver a continuous standstill torque of 17.5 Nm, providing steady holding force without overheating during prolonged dwell times. A centering pilot of 130 mm eases alignment to gearboxes or machine frames, while the square mounting face follows a 140/150 mm flange pattern that matches common IEC dimensions. Power passes through a keyed shaft, allowing rigid transmission of torque into pulleys or couplings and preventing slip under reversing loads. The unit is supplied without a holding brake, so position retention during power-off must be handled by external clamps or by the drive itself.

Feedback accuracy is handled by a digital servo feedback system with an integrated encoder that transmits incremental and absolute data to the controller. The measuring element supports absolute (>4096 revolutions) resolution, eliminating the need for homing after power restoration. A permanent shaft seal blocks coolant splash and fine dust from reaching the bearings, extending service life in contaminated environments. Electrical parameters are identified by winding code 035, and the B length version balances thermal mass with a compact 093 frame to achieve high dynamic response without excessive weight.

Wake Industrial stocks this motor, and same-day shipping can be arranged for qualified orders. For budgeting purposes, quotations remain valid for 30 days.