MHD093B-035-PG2-BA Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911321480
The Bosch Rexroth Indramat MHD093B-035-PG2-BA is a servo motor from the MHD Synchronous Motors series featuring a plain shaft design and natural convection housing cooling. It provides a continuous torque at standstill of 17.5 Nm with a holding brake torque of 32 Nm, and offers absolute position detection for more than 4096 revolutions. The motor has a degree of protection rated IP65 and includes digital servo feedback with an integrated encoder.
Internal Product Review
The MHD093B-035-PG2-BA is a Bosch Rexroth Indramat servo motor with natural convection cooling and IP65 protection. Digital servo feedback with integrated encoder and ±0.5 angular minute system accuracy support precise, consistent motion control in demanding automation service. A 32.0 Nm holding brake adds strong axis retention, making this motor an excellent choice for dependable servo performance.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD093B-035-PG2-BA is a servo motor manufactured by Bosch Rexroth Indramat for the MHD Synchronous Motors series. It converts commanded current from a drive into controlled rotary motion for indexing tables, packaging stations, and other closed-loop axes used in industrial automation. The model integrates absolute position sensing and routes its power leads to side B through an output connector, allowing compact mounting inside machines or cabinets. This arrangement supports precise speed and position control on axes that require stable feedback during repeated motion cycles.
A continuous torque at standstill of 17.5 Nm indicates the load the stator can carry continuously without exceeding thermal limits. Environmental sealing is rated at IP65, which helps prevent dust ingress and protects against low-pressure water jets during washdown. Rotor position is monitored through digital servo feedback using an optical encoder that maintains resolution across more than 4,096 revolutions. A spring-applied brake supplies 32.0 Nm of static torque to hold vertical loads when the drive is disabled. Closed-loop repeatability is enhanced by a positioning accuracy of ±0.5 angular minutes, which helps reduce cumulative error in multi-axis systems. Mechanical alignment is simplified by a flange pilot of 130 mm, which centers the motor accurately against gearboxes or machine frames.
For thermal stability, the housing relies on natural convection, so no external fan or liquid circuit is required. The motor supports an operating ambient range of 0 to 40 °C, which suits typical indoor industrial environments. Class F insulation tolerates winding temperatures up to 155 °C, providing added thermal margin during short overloads and during storage from -20 to +80 °C. The motor also has a plain shaft with an integral seal, a 140/150 mm flange pattern, and suitability for installation up to 1,000 m above mean sea level. These features support direct mounting to machine structures while helping protect internal components during normal operation.
