Product Description:

The MHD093B-035-NP0-AN is a servo motor produced by Bosch Rexroth Indramat for the MHD Synchronous Motors series. It works as a rotary actuator that converts drive current into controlled motion for industrial positioning tasks on automated equipment. This model uses motor size 093, operates with relative position feedback, and is supplied without a holding brake, so the axis must rely on drive torque or an external holding device when power is removed. Because the feedback system is relative rather than absolute, the connected control system must establish a reference position before fully synchronized motion begins.

The stator winding code 035 delivers a continuous standstill torque of 17.5 Nm, giving the axis enough force for sustained low-speed operation. Position data is returned through Digital servo feedback (HSF), allowing the controller to process rotor movement with minimal delay during speed and position control. A centering diameter of 130 mm aligns the housing with the machine pilot, and the square flange measures 140 / 150 mm to fit standardized mounting patterns. Heat is removed through Liquid cooling, which supports higher thermal loading than surface convection alone and helps keep winding temperature stable during demanding duty cycles.

The motor uses a keyed shaft to transmit torque securely during repeated indexing and reversing cycles. Its overall length corresponds to code B, which gives the unit moderate axial depth for machines that need a balance between installation space and output capability. Power conductors exit on side A through an output connector, which can simplify cable routing when the motor is installed near adjacent axes or enclosure walls. A shaft seal also helps limit the entry of dust or lubrication mist at the drive end, supporting cleaner operation around the mechanical interface.