MHD093B-035-NG1-BN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911280028
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
26 Seconds
The Bosch Rexroth Indramat MHD093B-035-NG1-BN is a servo motor from the MHD Synchronous Motors series and features liquid cooling with a flange size of 140 or 150 mm. It delivers a continuous torque at standstill of 17.5 Nm and comes with a holding brake rated for 22.0 Nm. The motor has an IP65 protection rating and uses digital servo feedback (HSF) for position detection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD093B-035-NG1-BN is a rotary servo motor produced by Bosch Rexroth Indramat for the MHD Synchronous Motors series. It converts electrical power from a drive controller into tightly regulated torque and speed, letting automated lines position axes, indexes, or spindles with consistent precision. The motor’s closed-loop design and high-speed feedback make it suitable for packaging machines, gantry loaders, or metal-cutting heads that require repeatable motion under variable loads.
Its mechanical interface follows a centering diameter of 130 mm and a 140 / 150 mm square flange, allowing standard face mounting. The plain shaft can deliver a continuous stall torque of 17.5 Nm, while a holding brake rated at 22.0 Nm secures the load when power is removed. Position data are provided by an HSF digital servo encoder that uses an optical scanning method and reports relative displacement to the controller. Power cables exit on side B through an output connector, keeping installation clear of moving parts. Thermal stability is maintained by liquid cooling; coolant circulating through the housing removes losses before they reach the stator laminations. The sealed enclosure is classified at IP65, stopping dust and water jets from reaching internal components during wash-down or debris-laden operation.
The operating envelope spans 0 to 40 °C, with safe storage from -20 to +80 °C, and functionality remains unchanged up to 1000 m above mean sea level. Class F insulation supports the winding temperature limits associated with continuous industrial duty. Closed-loop repeatability is enhanced by a system accuracy of ± 0.5 angular minutes, helped by a shaft seal that augments the enclosure against fluid ingress. Size code 093, length code B, and winding code 035 specify the stator geometry and electrical characteristics used for drive tuning.
Frequently Asked Questions about MHD093B-035-NG1-BN:
Q: Does the MHD093B-035-NG1-BN have a holding brake?
A: Yes, the MHD093B-035-NG1-BN includes a holding brake with a torque of 22.0 Nm.
Q: What is the continuous standstill torque of the MHD093B-035-NG1-BN motor?
A: This model provides a continuous torque of 17.5 Nm at standstill.
Q: What degree of protection does the MHD093B-035-NG1-BN motor have?
A: The degree of protection for this motor is rated at IP65, offering protection against dust and water jets.
Q: What type of encoder does the MHD093B-035-NG1-BN use?
A: The MHD093B-035-NG1-BN uses a digital servo feedback (HSF) encoder with optical measurement for position detection.
Q: What type of cooling is utilized by the MHD093B-035-NG1-BN motor?
A: Liquid cooling is used for the housing of this motor, enhancing its thermal management.
