Product Description:

The MHD093B-035-NG0-LA/S018 is a servo motor manufactured by Bosch Rexroth Indramat within the MHD Synchronous Motors series. In industrial automation, this AC unit is mounted on positioning axes to deliver regulated torque and speed to machine tools, handling stations, and printing equipment. When paired with a compatible drive controller, the motor uses feedback to help the axis reach commanded positions with repeatable precision. Its plain shaft transfers mechanical power directly to the driven assembly, and the sealed housing suits enclosed machinery where compact motor placement is important.

The motor sustains a continuous standstill torque of 17.5 Nm, allowing static loads to be held without overheating. Its housing carries an IP65 rating that blocks dust and low-pressure water. Mounting uses a 140 / 150 mm square flange, and heat is removed by natural convection, so no separate blower is required. Reliable service is permitted at ambient temperatures of 0 to 40 °C, and Class F insulation supports the winding system during normal thermal loading. The power lead exits to the left through a molded connector, which helps keep cable routing orderly in compact cabinets. The motor uses frame size 093 with B length, and an optical measuring method monitors rotor angle for drive control.

A centering diameter of 130 mm aligns the flange with adjoining machinery. Position feedback relies on Digital servo feedback (HSF), which provides an accuracy of ± 0.5 angular minutes for precise motion control. Electrical design code 035 matches the winding to compatible MHD drives. Storage is permitted from −20 °C to 80 °C, and installation is limited to 1000 m above mean sea level. A shaft seal helps block contaminants at the output end, and the motor is supplied without a holding brake, so any static load must be secured by the drive or by external hardware. After a power interruption, position handling is based on relative detection, and the cooling path must remain unobstructed during operation.