Product Description:

The MHD093B-035-NG0-BN servo motor is produced by Bosch Rexroth Indramat and belongs to the MHD Synchronous Motors series. As a brushless AC unit, it converts drive current into controlled rotary motion. This supports positioning axes, pick-and-place modules, and similar automation tasks that require rapid speed changes and repeatable torque. The motor is intended for dynamic motion duties in automated equipment.

Its continuous torque at standstill is 17.5 Nm, allowing the shaft to hold load without thermal overload during static clamping. Protection level IP65 prevents dust ingress and water jets from reaching the internal windings, so no additional housing is required on the machine frame. A liquid-cooling jacket removes heat directly from the stator and helps the motor deliver rated output in tight enclosures. Rotor position is monitored through digital servo feedback (HSF), an optical high-speed system that sends position data to the drive. Mounting is supported by a 130 mm centering diameter and a 140/150 mm flange pattern. Winding code 035 indicates electrical resistance and inductance matched to standard Indramat inverters, and the motor has no holding brake. The power connector is oriented to side B, the housing uses the B length, and position detection is relative.

System accuracy is ± 0.5 angular minutes, so closed-loop controllers can maintain tight part tolerances. The motor operates within an ambient range of 0 to 40 °C and can be installed up to 1000 m above mean sea level without derating. A shaft seal is fitted, and the plain shaft allows direct coupling with backlash-free clamps or hub connections. The windings use Class F insulation, which supports repeated thermal cycling. Storage is permitted from -20 to +80 °C, and the optical measurement system supports accurate feedback during operation.