MHD093B-024-PP0-BA Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911311814
The Bosch Rexroth Indramat MHD093B-024-PP0-BA is a servo motor from the MHD Synchronous Motors series with a continuous torque at standstill of 17.5 Nm and insulation class F. It features a keyed shaft, IP65 degree of protection, and uses digital servo feedback with an integrated encoder for absolute position detection. The motor has a flange size of 140 to 150 mm and operates with natural convection cooling.
Internal Product Review
The MHD093B-024-PP0-BA is a Bosch Rexroth Indramat servo motor with natural convection cooling and IP65 protection. Digital servo feedback with integrated encoder supports confident closed-loop control, and ±0.5 angular minute system accuracy reflects strong positioning precision. Continuous standstill torque of 17.5 Nm makes the motor a very capable choice for precise servo axes.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD093B-024-PP0-BA is a servo motor produced by Bosch Rexroth Indramat within the MHD Synchronous Motors series. It serves as a rotary actuator in automated machinery, moving conveyors and tooling with precise speed and position control. The unit uses a keyed shaft for mechanical coupling and relies on a digital encoder for feedback so that drive controllers can position the load accurately under varying speed and torque demands. This arrangement suits transfer systems, indexing axes, and other automated motion tasks that require repeatable rotary output.
The motor develops a continuous standstill torque of 17.5 Nm, allowing equipment to hold static loads without overheating. Mechanical alignment is simplified by a 130 mm centering diameter, while the square flange pattern of 140 / 150 mm fits standard mounting plates. A sealed housing rated IP65 blocks dust and water jets, and natural convection removes heat without external blowers. The stator windings remain within normal thermal limits when the ambient temperature stays between 0 to 40 °C. Power enters through a connector on side B of the frame, keeping cable routing clear of moving parts. Feedback is supplied by an integrated digital servo encoder with optical measurement, so the axis can accelerate and decelerate precisely along programmed profiles.
Electrical insulation meets Class F requirements, allowing temperatures up to 155 °C during intermittent peaks. Closed-loop accuracy is reinforced by a positional deviation of no more than ± 0.5 angular minutes, and the absolute encoder tracks more than 4096 revolutions without battery backup. The motor uses winding code 024, which matches the stator's electrical characteristics to compatible Indramat drive modules for stable current control. A shaft seal is fitted to help restrict lubricant egress, and the motor is supplied without a holding brake for applications that already use mechanical locks. Storage is permitted from -20 to +80 °C, and installation is supported at altitudes up to 1000 m. The keyed shaft, size 093 frame, and B length support integration into machines that use this motor platform.
