Product Description:

The MHD093B-024-PG2-BA is a servo motor produced by Bosch Rexroth Indramat for the MHD Synchronous Motors series. It combines a 093 frame size with the 024 winding code and is supplied in B motor length, which suits compact servo axes that still need stable torque output. A plain shaft transfers torque to the load, and a shaft seal is fitted for fluid-splash environments. Electrical power is routed through an output connector on side B of the housing, which supports cleaner cable routing where cabinet or machine space is limited. Absolute position data over more than 4096 revolutions is provided by an optically read digital servo feedback encoder for closed-loop automation tasks that require very fine position correction.

The motor can deliver a continuous standstill torque of 17.5 Nm, and motion is held during power-off by a brake rated at 32.0 Nm. An IP65 enclosure keeps out dust and resists low-pressure water jets, making the unit suitable for industrial areas where airborne debris or splash may be present. The motor operates without derating from 0 °C to 40 °C, and the class F insulation system allows the windings to tolerate higher internal heat during demanding duty cycles. Servo loop precision is supported by a system accuracy of ± 0.5 angular minutes, which helps the drive maintain repeatable positioning.

A centering diameter of 130 mm aligns the flange, and the mounting pattern spans 140 / 150 mm for attachment to machine frames or gearbox faces. Cooling is handled by natural convection, so no external blower is required during operation, and storage is permitted from -20 to +80 °C when the motor is not energized. Installation sites can be located up to 1000 meters above mean sea level without performance adjustment. The flange geometry helps the housing seat accurately against mating surfaces during assembly.