Product Description:

The MHD093B-024-PG1-AA is a servo motor built by Bosch Rexroth Indramat within the MHD Synchronous Motors series. It supplies controlled rotary motion for CNC axes, pick-and-place gantries, and other feedback-regulated assemblies where precise speed and position are required to synchronize tooling, conveyance, or robotic joints inside automated cells. Passive thermal dissipation relies on natural convection across the ribbed housing.

The motor can deliver a continuous standstill torque of 17.5 Nm, allowing stable force output when holding or slowly indexing heavy loads. An integral brake supplies 22.0 Nm of static torque so vertical or suspended axes remain fixed after power is removed. The housing is rated to IP65, protecting the internal windings against dust ingress and high-pressure water jets. Position information is captured by digital servo feedback that works with the drive controller to resolve motion with a system accuracy of ± 0.5 angular minutes. Absolute measurement over more than 4096 revolutions is obtained through an optical method. Mechanical integration is supported by a 130 mm centering diameter, a 140/150 mm flange pattern, and a plain shaft with a shaft seal. Power reaches the stator through an output connector on side A, while winding code 024 and length code B indicate the motor’s electrical constants and frame depth.

Permissible service temperatures extend from 0 to 40 °C, ensuring continuous operation on the plant floor without derating. During warehousing or transit, the unit tolerates storage between -20 to +80 °C, maintaining magnet integrity and encoder calibration. Installation is approved up to 1000 m above sea level, covering most factory elevations without additional cooling measures. Class F insulation supports winding temperatures to 155 °C, giving margin against thermal cycling. The 093 frame size keeps inertia moderate for precision indexing systems.