Product Description:

The MHD093B-024-NP0-LA is a servo motor produced by Bosch Rexroth Indramat within the MHD Synchronous Motors series. With its 093 frame size, the unit supplies rotational motion and position control to automated machinery that relies on closed-loop drives for coordinated axes. Serving as a brushless AC actuator, it interfaces with digital drive controllers to convert commanded current into mechanical torque for tasks such as indexing tables, handling modules, or packaging spindles.

The motor delivers a continuous standstill torque of 17.5 Nm, allowing it to hold loads without overheating when the rotor is locked. Environmental sealing meets IP65, so internal components stay protected from dust ingress and water jets. Installation accuracy is supported by a centering pilot of 130 mm that aligns the housing to the machine flange, and matching bolt patterns are provided by a flange size of 140 / 150 mm. Position feedback is generated optically through a digital servo feedback encoder with relative position detection and a system accuracy of ± 0.5 angular minutes. Cooling occurs by natural convection through the ribbed housing, and a shaft seal helps block lubricant migration along the keyed shaft. The power cable exits to the left through a molded power connector, and an external brake is required when mechanical holding is needed at power-off because the motor is supplied without a holding brake.

Operational limits include an ambient temperature range of 0 to 40 °C during service and a storage window of -20 to +80 °C when the machine is idle. Electrical insulation is class F, allowing winding temperatures up to 155 °C. The stator uses winding code 024, which matches the coil resistance and inductance to compatible drive modules. The motor may be mounted at altitudes up to 1000 m above sea level, and its compact B-length frame helps save space in tight machine layouts.