MHD093B-024-NG1-AN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911319255
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
31 Seconds
The Bosch Rexroth Indramat MHD093B-024-NG1-AN is a servo motor from the MHD Synchronous Motors series with a 17.5 Nm continuous torque at standstill and liquid cooling. It features a plain shaft with a shaft seal, digital servo feedback encoder, and a holding brake with a torque of 22.0 Nm. The motor has a centering diameter of 130 mm and a flange size of 140 or 150 mm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD093B-024-NG1-AN is a servo motor manufactured by Bosch Rexroth Indramat for the MHD Synchronous Motors series. It converts commanded current from an intelligent drive into rotary motion with tightly regulated torque and speed, serving automated machining centers, packaging lines, and material-handling axes. By combining a brushless stator with precision rotor balancing, the unit sustains continuous duty while maintaining the position accuracy required in industrial automation. Its operating style suits axes that need repeatable starts, stops, and speed changes over long production runs.
At standstill under rated current, the motor produces a continuous standstill torque of 17.5 Nm, enabling stable holding force without overheating during low-speed or stationary operation. Position data are returned through Digital servo feedback (HSF), and the high-speed serial channel supports fine interpolation so the controller can close position loops precisely. Heat generated in the windings is removed by liquid cooling, allowing higher power density than comparable air-cooled models. A square mounting interface of 140 / 150 mm aligns the motor to gearboxes or frames, and an integral brake supplies 22.0 Nm of torque to secure vertical or suspended loads when power is off.
A centering diameter of 130 mm brings the flange into concentric alignment for accurate mounting. The rotor uses a plain shaft, allowing clamping hubs or externally fitted drive elements as needed. Position measurement remains incremental because the feedback system operates in relative mode, with commutation values established during startup. The motor uses winding code 024, which matches the drive’s voltage and current settings. A shaft seal helps protect the bearing area from contamination, the power connector faces side A for cable routing, and the housing uses motor length class B with frame size 093 for compact mid-range servo axes.
Frequently Asked Questions about MHD093B-024-NG1-AN:
Q: What type of housing cooling is featured on the MHD093B-024-NG1-AN motor?
A: This motor has liquid cooling for optimal thermal management in demanding operations.
Q: Does the MHD093B-024-NG1-AN motor include a holding brake and what is its torque?
A: The MHD093B-024-NG1-AN comes equipped with a holding brake that provides 22.0 Nm of torque.
Q: What encoder type is used in the MHD093B-024-NG1-AN servo motor?
A: This model uses digital servo feedback (HSF) as its encoder type.
Q: What is the continuous standstill torque rating for the MHD093B-024-NG1-AN motor?
A: The continuous torque at standstill for this model is 17.5 Nm.
Q: What type of shaft design does the MHD093B-024-NG1-AN motor use?
A: A plain shaft with a shaft seal is utilized in this motor, aiding in preventing contamination.
