MHD093B-024-NG0-RA Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911305559
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
37 Seconds
The Bosch Rexroth Indramat MHD093B-024-NG0-RA is a servo motor from the MHD Synchronous Motors series. It features a continuous torque at standstill of 17.5 Nm and uses digital servo feedback for position detection. This motor has a plain shaft with a shaft seal, a centering diameter of 130 mm, and is cooled by natural convection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD093B-024-NG0-RA belongs to the MHD Synchronous Motors series manufactured by Bosch Rexroth Indramat. It is a servo motor intended for industrial automation where closed-loop speed and position control are needed on packaging axes, handling modules, and gantry drives. The design combines a 093 frame with a B-length stator to give a mid-range output package, and it interfaces with Indramat drive controllers through an integrated power connector and digital feedback channel. In typical motion systems, it is used on axes that must accelerate, stop, and repeat position changes with consistent response. The integrated connector arrangement also helps keep the motor body compact at the mounting point.
The motor can deliver a continuous standstill torque of 17.5 Nm, allowing steady holding or slow-speed operation without overheating. A centering diameter of 130 mm aligns the stator flange on machine plates, while the dual flange pattern of 140 / 150 mm lets the motor fit either metric or Indramat drilling patterns. Rotor position is reported by a digital servo feedback (HSF) encoder, which supports high-speed sampling for tight control loops. A plain shaft transmits torque without keyway stress concentrations and includes a shaft seal to help limit lubricant migration. The flange geometry also supports direct mounting to servo plates and common gearbox adapters where alignment accuracy is important.
Thermal management relies on natural convection, so the housing must remain exposed to ambient air for proper dissipation. Power and feedback cabling exit to the right, which can simplify routing where the drive is mounted below the motor and cable bends must stay controlled. The position transducer delivers relative position data, so the axis must complete a homing routine after startup before absolute positioning can begin. Winding set 024 pairs with Indramat drives that supply the matching voltage and current range, helping the magnetic circuit reach nominal flux without excessive losses. Because the unit is supplied without a holding brake, external locking devices are required when vertical loads must stay fixed during power removal.
Frequently Asked Questions about MHD093B-024-NG0-RA:
Q: What kind of encoder does the MHD093B-024-NG0-RA motor utilize?
A: This model uses digital servo feedback (HSF) for encoder type.
Q: What is the continuous torque at standstill for the MHD093B-024-NG0-RA?
A: The continuous torque at standstill for this motor is rated at 17.5 Nm.
Q: Where is the power connection located on the MHD093B-024-NG0-RA?
A: The power connection is positioned to the right and uses a power connector setup.
Q: How is the MHD093B-024-NG0-RA motor cooled during operation?
A: The MHD093B-024-NG0-RA operates with natural convection housing cooling.
Q: Is the MHD093B-024-NG0-RA equipped with a holding brake?
A: This motor is designed without a holding brake.
