MHD093B-024 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
19 Seconds
The Bosch Rexroth Indramat MHD093B-024 is a servo motor from the MHD Synchronous Motors series with a center diameter of 130 mm and a flange size of 140 or 150 mm. This motor has a continuous torque at standstill of 17.5 Nm and features a B motor length with a size code of 093.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD093B-024 is a rotary servo motor built by Bosch Rexroth Indramat and placed within the MHD Synchronous Motors series. As a permanently excited AC motor, it converts drive current from a compatible inverter into mechanical rotation for positioning, indexing, or speed-regulated tasks on automated lines, packaging stations, and handling modules. This design supports closed-loop motion where steady torque delivery and repeatable response are needed during frequent starts, stops, and speed changes.
It mounts against adjacent machinery through a centering pilot of 130 mm, allowing accurate coaxial alignment between the stator housing and the driven load. At standstill, the electromagnetic design sustains a continuous torque of 17.5 Nm, so holding force is available without overheating while the axis remains locked in position. The square flange pattern measures 140 / 150 mm, giving sufficient surface for four-bolt attachment on standard servo gearboxes or structural frames. Winding code 024 indicates the resistance and inductance pairing used by the motor, which affects the current required from the drive and the dynamic response. The mechanical depth corresponds to motor length code B, providing a balance between thermal mass and overall size when the machine layout requires moderate shaft extension but still favors compact installation.
The frame designation 093 places the rotor and stator in the manufacturer’s mid-range envelope, balancing inertia for fast indexing with enough pole surface for demanding positioning duty. The motor is designed for use with Bosch Rexroth Indramat drive electronics, which support consistent control behavior across compatible systems. Within the MHD Synchronous Motors family, this unit uses the series mechanical interfaces and feedback options for straightforward installation in compatible equipment. Classified as a servo motor, the model supports closed-loop velocity and position control, enabling coordinated multi-axis motion where repeatability is critical and cycle times are short.
Frequently Asked Questions about MHD093B-024:
Q: What is the centering diameter of the MHD093B-024 motor?
A: The MHD093B-024 servo motor features a centering diameter of 130 mm for precise mounting alignment.
Q: What is the continuous torque at standstill for the MHD093B-024?
A: This model provides a continuous torque at standstill of 17.5 Nm for stable operations.
Q: What flange size does the MHD093B-024 offer for installation?
A: The MHD093B-024 has a flange size of 140 / 150 mm to match compatible machine interfaces.
Q: What motor length is the MHD093B-024 designed with?
A: This unit is constructed in motor length B, providing a balanced form factor.
Q: What is the motor size designation for the MHD093B-024 model?
A: The MHD093B-024 is classified as motor size 093 within the MHD series.
