Product Description:

The MHD093A-058-NG2-AA is a servo motor produced by Bosch Rexroth Indramat and placed within the MHD Synchronous Motors series. It is intended for closed-loop motion in packaging lines, transfer systems, and machine tools where fast response and repeatable positioning are essential. By pairing high-resolution feedback with a low-inertia rotor, the motor provides stable velocity regulation and smooth interpolation. This design supports precise axis movement during repeated starts, stops, and direction changes in automated equipment.

At standstill, the motor can deliver a continuous torque of 12.0 Nm, allowing it to hold loads during sustained dwell periods without overheating. The enclosure has an IP65 rating, which helps protect internal components from dust and water jets in industrial settings. Position information is generated through digital servo feedback (HSF), an optical system that supplies incremental data for fast control loops. A factory-installed brake provides 32.0 Nm of holding torque, so the axis can remain locked when power is removed. Overall motion accuracy reaches ± 0.5 angular minutes when the drive processes the relative position data. The motor also uses a plain shaft with a shaft seal to protect the bearing area during normal operation.

The motor operates in ambient temperatures from 0 to 40 °C and can be stored at -20 to +80 °C without affecting insulation class F integrity. Heat is removed by natural convection, so the installation should allow free airflow around the housing. A centering shoulder of 130 mm mates with a 140/150 mm flange for accurate alignment during mounting. The power connector is oriented toward side A, which can simplify cable routing in compact machine layouts. Maximum installation altitude is 1000 m above sea level. The mounting arrangement also helps maintain consistent shaft alignment with connected couplings or transmission components.