Product Description:

The MHD093A-058 is a permanent-magnet AC servo motor produced by Bosch Rexroth Indramat. In industrial automation, it functions as a rotary actuator that converts regulated drive current into repeatable torque for conveyors, feeders, and handling gantries. Its integrated electronic feedback returns real-time position data to the drive so closed-loop positioning and speed regulation can be maintained during axis movement. The motor is intended for applications that require controlled acceleration, deceleration, and accurate rotational response. This makes it suitable for synchronized machine cycles where motion consistency is important.

Its mechanical interface starts with a centering shoulder of 130 mm, which helps align the stator housing concentrically in a machine frame or gearbox pilot. At zero speed, the motor can deliver 12.0 Nm of continuous torque, so it can support steady loads during normal operation. Mounting holes follow a square pattern that matches the 140 / 150 mm flange arrangement, allowing the same motor body to fit two common mounting interfaces. The frame size of 093 identifies the housing scale used for this model. The winding code 058 identifies the electrical winding used by compatible Indramat drive combinations.

Physical depth is limited by length code A, which keeps the motor short where rear clearance behind the mounting plate is limited. As part of the MHD Synchronous Motors line, the unit uses a housing format intended for precise axis control rather than general-purpose constant-speed duty. The motor is built as a servo motor, so it is suited to applications that need commanded acceleration, controlled deceleration, and accurate position response from the connected drive. The short housing is useful when the machine layout leaves little room behind the flange. This format also supports compact installation in tightly spaced automation equipment.