Product Description:

The Bosch Rexroth Indramat MHD093A-035-PP0-BA belongs to the MHD Synchronous Motors series and serves as a torque-dense servo motor for numerically controlled machine axes and handling systems. Its integrated digital encoder supplies absolute position data to the drive controller. This allows the motor to execute precise moves and hold commanded positions within tight mechanical tolerances on automated lines. The motor is suited to applications that require quick response and stable closed-loop operation during repetitive duty cycles.

The motor delivers a continuous standstill torque of 12.0 Nm, providing steady force for static loads without overheating. A centering diameter of 130 mm and a flange face of 140 / 150 mm establish the mounting interface for gearboxes or frames. Protection class IP65 and a shaft seal help keep contaminants out while the unit is cooled by natural convection. Position feedback is measured optically, and the digital servo feedback system provides a system accuracy of ± 0.5 angular minutes. Power is routed through an output connector on side B, so cabinet wiring can remain fixed while the keyed shaft transmits torque. The stator winding uses code 035, and insulation class F permits winding temperatures up to 155 °C. Motor size 093 and length code A set the overall envelope, while absolute position detection over more than 4096 revolutions supports multi-turn applications.

The permitted operating ambient is 0 to 40 °C. The storage range is −20 to +80 °C. Installation is permitted up to 1000 m above mean sea level without derating. The unit is supplied without a holding brake, so vertical or suspended loads must be secured by drive torque or external locking hardware during power-off states.