Product Description:

The MHD093A-035-PG1-LA is a servo motor produced by Bosch Rexroth Indramat for integration in the MHD Synchronous Motors series. As a permanent-magnet AC unit, it converts electrical energy from a drive controller into controlled rotational motion for positioning axes, gantry drives, and packaging equipment within industrial automation. The motor belongs to a modular platform that pairs with Indramat digital drives and maintains a common mechanical interface across different torque ratings.

At standstill the rotor can deliver 12.0 Nm of continuous torque, giving the axis enough holding force for applications such as indexing tables. When power is removed, a built-in brake supplies 22.0 Nm of static torque, so vertical loads remain secure without external clamps. The motor centers on a 130 mm pilot and fastens through a rectangular flange that measures 140/150 mm. Size code 093 and length code A indicate the stator stack depth and overall body length, keeping mass low for this torque range. The plain output shaft is factory-ground for concentricity, and a shaft seal helps prevent lubricant escape in oil-mist environments.

Thermal energy leaves the housing by natural convection, so no separate fan or liquid circuit is required and the motor can be mounted in sealed machine compartments. Power enters through a right-angle power connector, and the molded receptacle is oriented to the left to clear adjacent axes. Winding code 035 matches the electrical characteristics used with a 300 V DC bus drive. Position data comes from an integrated digital encoder that provides absolute feedback for more than 4096 revolutions, eliminating homing moves after power cycles. Because the drive shaft is a plain shaft, torque is transmitted with shrink or clamp couplings. The shaft seal helps maintain IP65 protection in splash zones.