MHD093A-035-NP1-BA Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911290757
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
12 Seconds
The Bosch Rexroth Indramat MHD093A-035-NP1-BA is a servo motor that belongs to the MHD Synchronous Motors series and features a keyed shaft with shaft seal. It offers a continuous torque at standstill of 12.0 Nm, comes with a holding brake rated at 22.0 Nm, and supports digital servo feedback using optical measurement. This motor is protected by an IP65 enclosure and uses natural convection cooling.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD093A-035-NP1-BA is a permanent-magnet servo motor manufactured by Bosch Rexroth Indramat and assigned to the MHD Synchronous Motors series. It serves as the rotary drive element in automated machinery, delivering commanded speed and position profiles for packaging lines, transfer stations, and general handling systems. Mechanical integration is simplified by a 140/150 mm square flange, a 130 mm centering diameter, and size-093 laminations in the short A-length housing. The flange and centering features help seat the motor accurately on mating machine surfaces during installation.
A keyed shaft with a shaft seal transmits load while limiting contaminant ingress. The winding code 035 aligns electrical constants with compatible Rexroth drives, allowing a continuous standstill torque of 12.0 Nm. An internal brake supplies 22.0 Nm so vertical axes remain fixed when power is removed. The brake also supports load holding during shutdowns or power loss. Heat is removed through natural convection, and the windings use Insulation Class F. The enclosure is rated IP65, preventing dust and water jets from reaching live parts. Power is supplied through an output connector on side B, which helps reduce cable loops inside the cabinet.
The feedback system uses Digital servo feedback (HSF) with an optical measuring method to supply high-density incremental data to the drive controller. This feedback arrangement allows the drive to monitor rotor movement continuously during positioning and speed-controlled operation. Relative position detection pairs with a system accuracy of ± 0.5 angular minutes, enabling fine error compensation without external encoders. During operation, the motor maintains thermal stability between 0 to 40 °C, and it may be stored from -20 to +80 °C without degradation. Installation is permitted up to 1000 m above mean sea level for standard operation.
Frequently Asked Questions about MHD093A-035-NP1-BA:
Q: What shaft design is provided on the MHD093A-035-NP1-BA motor?
A: The MHD093A-035-NP1-BA is equipped with a keyed shaft for mechanical coupling.
Q: Does the MHD093A-035-NP1-BA motor come with a holding brake and what is its torque?
A: This model features a holding brake with a torque of 22.0 Nm.
Q: What type of encoder and measurement method does the MHD093A-035-NP1-BA use?
A: It uses digital servo feedback (HSF) for encoder type, utilizing optical measurement for position detection.
Q: What is the degree of protection rating for the MHD093A-035-NP1-BA?
A: The degree of protection for this motor is rated at IP65, offering resistance against dust and low pressure water jets.
Q: What continuous torque at standstill does the MHD093A-035-NP1-BA provide?
A: The continuous torque at standstill for this motor is 12.0 Nm, suitable for demanding servo applications.
