Product Description:

The MHD093A-035-NG0-LA is a servo motor produced by Bosch Rexroth Indramat and assigned to the MHD Synchronous Motors series. Designed to deliver controlled rotary motion to automation axes, the unit interfaces with digital drive controllers through its integrated digital servo feedback (HSF) encoder and optical measurement method. Its plain shaft, left-side power connector, and relative position detection make it suitable for packaging, handling, and material-processing equipment.

The motor’s centering pilot measures 130 mm, which aligns the stator housing precisely on a machine frame. A continuous standstill torque of 12.0 Nm can be maintained without forced cooling, while the flange pattern of 140/150 mm simplifies interchange with other size-093 frames. The housing is sealed to IP65, so internal components stay protected against dust and water jets during washdown cycles. Heat is removed through natural convection, so no external fan or liquid lines are required. A shaft seal helps block lubricant escape, and the power connector is positioned to the left for cable routing in tight cabinets. Winding code 035 sets the electrical constants of this variant.

The motor operates reliably between 0 to 40 °C ambient and carries insulation class F, letting winding temperatures reach 155 °C without degradation. System feedback provides a positioning accuracy of ±0.5 angular minutes, which is useful for fine indexing tasks. The motor is supplied without a holding brake, so external mechanical locking or active torque must be used for static loads. Storage temperatures can span −20 to +80 °C, and installation is permitted up to 1000 m above mean sea level. The A-length housing keeps overall mass low, while motor size 093 balances inertia with dynamic response for medium-power axes.