MHD093A-035 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
3 Seconds
The Bosch Rexroth Indramat MHD093A-035 is a servo motor that belongs to the MHD Synchronous Motors series. It features a centering diameter of 130 mm and a flange size of 140 or 150 mm. The motor delivers a continuous torque at standstill of 12.0 Nm and has a motor size of 093.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MHD093A-035 from Bosch Rexroth Indramat is an AC synchronous motor that converts commanded current into regulated rotary motion for automated tools, conveyors, and assembly stations. It serves as the electromechanical interface between the controller and the driven load, supporting repeatable positioning and stable velocity during normal machine operation across repeated cycles. Because the rotor remains synchronized with the applied drive frequency, the motor can follow commanded speed without slip in coordinated axis systems. In automated equipment, that helps maintain consistent motion during indexing, transfer, and general positioning tasks. That makes it appropriate for feed axes and other motion applications that require smooth, repeatable control.
For mechanical alignment, the motor provides a centering diameter of 130 mm, allowing it to seat firmly in precision-machined bores and reduce runout at the mounting face. The mounting face uses two bolt patterns of 140 / 150 mm, so the housing can attach directly to more than one standard machine interface. Under continuous stall conditions, the stator can sustain 12.0 Nm of torque while remaining within its thermal limits. This is the maximum static load the motor can resist while the shaft is locked and heat is transferred through the housing. The face geometry also supports rigid installation without added spacer hardware when one of those bolt circles matches the machine.
Within the MHD Synchronous Motors family, the unit uses motor size 093 and length code A, which keeps the housing relatively short for machines with limited rear clearance. Its electromagnetic circuit uses winding code 035, giving a compatible inverter the electrical values needed for current regulation. The winding selection is matched to the motor frame so the electrical and thermal behavior remains consistent with the intended drive pairing. The unit is categorized as a Servo Motor for closed-loop motion control with fast dynamic response and accurate position correction.
Frequently Asked Questions about MHD093A-035:
Q: What is the continuous torque at standstill for the MHD093A-035 motor?
A: The MHD093A-035 features a continuous torque at standstill of 12.0 Nm.
Q: What is the centering diameter of the MHD093A-035 servo motor?
A: This model has a centering diameter measuring 130 mm for mounting alignment.
Q: What flange size options are available for the MHD093A-035 motor?
A: The MHD093A-035 comes equipped with a flange size of either 140 or 150 mm.
Q: What motor length is provided on the MHD093A-035 model from Bosch Rexroth?
A: The MHD093A-035 is manufactured in motor length A as part of its design.
Q: What is the motor size classification for the MHD093A-035 synchronous motor?
A: This motor falls under the motor size 093 designation within the MHD series.
