Product Description:

The MHD093A-024-PP1-BA is a brushless AC servo motor produced by Bosch Rexroth Indramat for the MHD Synchronous Motors series. Designed for closed-loop positioning and velocity control, the unit converts drive current into controlled rotary motion for packaging lines, gantry axes, and material-handling stations. Integrated digital feedback reports rotor angle to the connected drive, allowing the controller to synchronize multiple axes and correct disturbances in real time. Within an automation cell, the motor functions as the electromechanical actuator that moves loads with consistent torque and repeatable accuracy.

Mechanical interface begins with a centering pilot of 130 mm, which aligns the motor flange concentrically with the machine frame and minimizes runout. Mounting holes follow a dual pattern of 140 / 150 mm so the same model fits both standard pitch bolt circles. At standstill, the stator can develop 12.0 Nm of continuous torque without overheating because heat is removed by natural convection across the ribbed housing. The motor is delivered with a holding brake that resists back-driving, and its static capacity of 22.0 Nm keeps vertical or overhung loads fixed whenever power is disabled. Digital servo feedback is provided by an integrated encoder that streams position and velocity data to the drive.

Power enters through an output connector on side B, allowing cable routing parallel to the shaft axis and away from moving components. A keyed shaft transfers torque to couplings while preventing slip, and a shaft seal blocks dust and coolant from entering the bearing chamber. The feedback device supplies absolute resolution of more than 4096 revolutions, so homing cycles are unnecessary after power loss. Electrical characteristics follow winding code 024, and the A-length, size 093 frame balances inertia with envelope size for medium-duty servo axes.